KitchenAid KBHS179B Benutzerhandbuch

Seite von 48
9
Clock
This is a 12-hour clock. Before setting, make sure the oven, 
Timer, and Timed Cooking are off.
To Set:
1. Touch CLOCK SET.
2. Touch the number keypads to set the time of day.
3. Touch CLOCK SET or START.
Tones
Tones are audible signals, indicating the following:
One beep
Valid keypad touch
Function has been entered
One chime
Oven is preheated
Preheat cycle has been completed
Three beeps
Invalid keypad touch
Three chimes
End of a cooking cycle
Four chimes
When timer reaches zero
Includes using the Kitchen Timer for functions other than 
cooking.
Tone Volume
The volume is preset at low, but can be changed to high.
To Change: touch TOOLS and then “3” to toggle volume 
between high and low settings.
All Tones
All tones are preset on, but can be turned off.
To Turn Off/On: touch TOOLS and then “2” to toggle tones 
between On and Off settings.
End-of-Cycle and Reminder Tones
The Timed Cooking end-of-cycle and reminder tones are preset 
on, but can be turned off. If all tones have been turned off, the 
end-of-cycle and reminder tones cannot be independently turned 
on.
To Turn Tones Off/On: touch TOOLS and then “4” to toggle 
tones between On and Off settings.
NOTE: The Kitchen Timer is not affected by these reminder 
tones.
Tools 
(Microwave Oven Models)
The Tools selection keypad allows access to 7 hidden functions 
within the Electronic Oven Control. These hidden functions allow 
you to change the oven temperature between Fahrenheit and 
Celsius, turn the audible signals on and off, prompts, turn the 
turntable on and off, select the language, and select demo 
modes.
NOTE:  This procedure is for dedicated microwave ovens only. 
Tools for combination ovens will appear on the oven display.
To Use: 
1. Touch TOOLS. The oven display will scroll through the 
various options, starting at 1 and ending automatically at 7.
You can also touch the Tools keypad repeatedly to manually 
scroll through the list of options.
2. Touch the number keypad for the specific option to toggle the 
function setup. Use the following chart as a guide.
TOOLS CHART
Fahrenheit and Celsius
The temperature is preset in Fahrenheit; however it can be 
changed to Celsius.
To Change: Touch OPTIONS and then “1” to toggle temperature 
between Fahrenheit and Celsius settings.
When the temperature is in Fahrenheit, “°F” follows the oven 
temperature.
When the temperature is in Celsius, “°C” follows the oven 
temperature.
Timer
The Timer can be set in minutes and seconds or hours and 
minutes and counts down the set time. 
NOTE: The Timer does not start or stop the oven.
To Set:
1. Touch SET/START.
Touch again to switch between MIN/SEC and HR/MIN.
If no action is taken, the control will continue to wait for a 
length of time to be entered.
2. Touch the number keypads to set the length of time.
3. Touch SET/START. 
If the keypad is not touched, the control will continue to wait 
for SET/START to be touched.
When the set time ends, 4 chimes will continuously repeat 
until the Timer Off keypad is touched.
If the Cancel keypad is touched, the oven will turn off; 
however, the Timer can only be turned off using the Timer Off 
keypad.
TOOLS
HIDDEN FUNCTION
1
Fahrenheit and Celsius conversion
2
Sound On/Off
3
Sound High/Low
4
End tone On/Off
5
Turntable On/Off
6
Language
7
Demo  mode