kussmaul 091-84-ds Benutzerhandbuch

Typical installations on gasoline and diesel engines are illustrated in figures 1 and 2. Mount

actuator and solenoid valve in an appropriate location and connect the actuator output to the

throttle mechanism. (Note: The actuator and solenoid valve must be purchased seperately.

Be certain that the ball chain or other coupling does not restrict throttle motion at full closed

throttle or wide-open throttle. Connect solenoid valve input to a source of vacuum for

gasoline engines or pressure for diesel engines. Pipe the solenoid valve output to the

actuator as illustrated in figure 1 or figure 2. Install wiring as shown.

The High Idler receives its power from the ignition switch and functions only when the

ignition switch is either "ON" or in the ACC. position. High Idle is automatically disabled

under any of the following conditions:

1. Operator depresses the "OFF" pushbutton on the Engine Idler

2. Operator depresses the brake pedal

3. Operator places the transmission into Drive or Reverse

4. Operator turns off the ignition switch