halcro-logic dm10 Benutzerhandbuch
Page 11 of 29
TM
dm10
7. Balance Control Right:
Using this
button in conjunction with Balance
Control Left (Fig 1, 4), the user can
change the relative volume for the left
and right channels. Pressing the Right
button will increase the volume on the
right hand channel and decrease the
volume on the left.
8. Input select control:
8. Input select control:
By turning this
knob, the preamplifier will scroll through
all
programmed input devices (CD
player, Tuner, DVD, etc.) attached to the
unit. The corresponding selected input is
displayed.
9 Volume control:
Turn this knob
clockwise to increase the volume and
counter-clockwise to decrease the
volume.
10. Phase button:
Depressing this button
will toggle the unit between in-phase and
out-of-phase mode.
11. Mono/Stereo button:
Whenever
Phono is selected, depressing this button
will change the unit between Stereo and
Mono modes.
Remote Control
1. Volume buttons
2. Mute button
3. Standby/On button
4. Signal Source buttons
5. Function button
1. Volume buttons
: For
volume control and also used
in conjunction with the function
button for various function
selections.
2. Mute button
: Press to Mute
sound to the loudspeakers, press
again to reactivate the sound.
3. Standby/On button
: Press
to switch the system between
Standby and On.
4. Signal Source buttons
:
Press to select any one of 6
signal sources on the dm10.
5. Function button
: Press
to choose the following
functions: balance between
the speakers, in-phase and
out-of-phase and stereo/
mono.
See
relevant
operating instructions for full
details
Note: Remote control takes 3 x AAA batteries (supplied)
Figure 7