halcro-logic dm10 Benutzerhandbuch
Page 2 of 29
TM
dm10
Important Safety Instructions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This unit shall be connected to a MAINS socket outlet with a
protective earthing connection.
Only suitable approved MAINS cords, as per European individual
country requirements in the CE Low Voltage Directive Scheme, shall
be used with this unit.
Do not use extension cords: To avoid safety hazards, use only the
power cord supplied with your unit. We do not recommend that
extension cords be used with this unit.
Weighs 23 kg (50 lbs.) per unit. Shipping weight 36 kg (79 lbs)
Designed for indoor use only. The dm10 preamplifier is not protected
against liquids.
The unit shall not be exposed to dripping or splashing. No objects
filled with liquids, such as vases, shall be placed on the apparatus.
No naked flame sources, such as lighted candles, should be placed on
the unit.
Designed to operate on any mains supply in the range of 90V to 240
V, 50 to 60 Hz, without any internal or external switches.
Do not attempt to open the unit as this will void the warranty and
will expose you to dangerous voltages.
Compartments are sealed at the factory. If the seals are broken, the
warranty will be void and all service costs will be charged to the
owner.
Requires F 1A L 250v fuse for continued protection against the risk of
fire. Never bypass or use any other type of fuse. The fuse is located
on the rear panel in the main switch.
90 - 240 V
50 - 60 Hz
50 - 60 Hz