jetway p4xfbr1a Benutzerhandbuch
17
(10) FAN Headers (3-pin) : SFAN1, SYSFAN, CPUFAN
These connectors support cooling fans of 350mA (4.2 Watts) or less, depending on the
fan manufacturer, the wire and plug may be different. The red wire should be positive,
while the black should be ground. Connect the fan’s plug to the board taking into
consideration the polarity of connector.
fan manufacturer, the wire and plug may be different. The red wire should be positive,
while the black should be ground. Connect the fan’s plug to the board taking into
consideration the polarity of connector.
SFAN1
1
3
SYSFAN
1
3
FAN Speed Headers
CPUFAN
1
3
(11) IR infrared module Headers (5-pin) : IR
This connector supports the optional wireless transmitting and receiving infrared
module. You must configure the setting through the BIOS setup to use the IR function.
module. You must configure the setting through the BIOS setup to use the IR function.
IR infrared module Headers
IR
Pin 1
GND
IRRX
NC
VCC5
IRTX
2
5
6
(12) CD Audio-In Headers (4-pin) : CD_IN
CD_IN are the connectors for CD-Audio Input signal. Please connect it to CD-ROM
CD-Audio output connector.
CD-Audio output connector.
CD Audio-In Headers
CD-IN
4
1