rose-displays quickgrip with multiclips Benutzerhandbuch
35 Congress Street, Salem, MA 01970
Tel# 1- 800-631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com
Parts
Instructions for Hanging
Instruction Sheet
Step 1
For use with poster paper or thinner
substrates. Score and fold or staple poster
edge and slide into the QuickGrip Holder.
When using staples, place staples 1/4” from
top and bottom edges of poster. Fig. 1
substrates. Score and fold or staple poster
edge and slide into the QuickGrip Holder.
When using staples, place staples 1/4” from
top and bottom edges of poster. Fig. 1
or
For use with thicker graphics up to 2mm.
Starting at one corner push the QuickGrip
Holder onto the graphic. Work your way
down the holder tapping it firmly down to
seat the graphic fully. Fig. 2
Starting at one corner push the QuickGrip
Holder onto the graphic. Work your way
down the holder tapping it firmly down to
seat the graphic fully. Fig. 2
Step 3
Squeeze sides of MultiClip together. Fig. 3
Align the bottom rail of the MultiClip with
the top channel of the plastic holder. Slide
MultiClip into rail. Fig. 4 Repeat step 3
for second MultiClip.
Align the bottom rail of the MultiClip with
the top channel of the plastic holder. Slide
MultiClip into rail. Fig. 4 Repeat step 3
for second MultiClip.
Step 4
Push end caps into place. Fig. 5
Step 5
Suspend poster. Fig. 6
Important note:
Please save and reuse the QuickGrip Holder,
End Caps and MultiClips for future projects.
End Caps and MultiClips for future projects.
End Caps
06-5525
MultiClips
1UP-010
1
QuickGrip™
Incept-8.5.02
QuickGrip is a trademark of Rose Displays, Ltd. Neither the manufacturer
nor any sales agent may be held liable for injury, loss or damage resulting
from the use of these products. Part #02INSQuickGripMC
nor any sales agent may be held liable for injury, loss or damage resulting
from the use of these products. Part #02INSQuickGripMC
QuickGrip
12-0500
Figure 6
Figure 5
Figure 3
Figure 4
Figure 2
Figure 1