jetway 630dfr1a Benutzerhandbuch

 
 
 
                                                                                                                                                                                                                                                                                                                                                         

 
 
 

 

 

 

 

  

 

 

 
(10)  Secondary IDE Connector (40-pin block): IDE2 
 

This connector connects to the next set of Master and Slave hard disks.  Follow 
the same procedure described for the primary IDE connector.  You may also 
configure two hard disks to be both Masters using one ribbon cable on the 
primary IDE connector and another ribbon cable on the secondary IDE 
connector. 

 

 

 

 

 

 

•  Two hard disks can be connected to each connector.  The first HDD is referred 

to as the “Master” and the second HDD is referred to as the “Slave”. 

•  For performance issues, we strongly suggest you don’t install a CD-ROM or 

DVD-ROM drive on the same IDE channel as a hard disk.  Otherwise, the system 
performance on this channel may drop. 

 

This header is for on board VGA display connection only.  If you insert any 
external VGA card in PCI slot, you should have the connection to your VGA 
card’s connector. And you have to set “Init Display First” to PCI under 
Integrated Peripherals option in BIOS Setup Utility to get display from PCI 
VGA card.