jetway p4xfcr2a Benutzerhandbuch

 
 
 
                                                                                                                                                                                                                                                                                                                                                         

 
 
 

 

The Power Management Setup allows you to configure your system to most effectively save 
energy saving while operating in a manner consistent with your own style of computer use. 

↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit  F1:General Help 

ACPI Function 
This item allows you to Enabled/Disabled the Advanced Configuration and Power 
Management (ACPI).  The settings are Enabled and Disabled. 
Video Off Option 
This determines the manner in which the monitor is blanked.  The choice are Suspend → 
off, All Modes → Off, and Always On. 
Video Off Method 
This determines the manner in which the monitor is blanked. 

DPMS (default) 

Initial display power management signaling. 

Blank Screen 

This option only writes blanks to the video buffer. 

V/H SYNC+Blank  This selection will cause the system to turn off the vertical and 

horizontal synchronization ports and write blanks to the video 
buffer. 

Modem Use IRQ 
This determines the IRQ in which the MODEM can use. 
The settings are: 3, 4, 5, 7, 9, 10, 11, NA. 
Power Button Function 
Pressing the power button for more than 4 seconds forces the system to enter the Soft-Off 
state.  The settings are: Delay 4 Sec, Instant-Off. 
Wake Up Events 
Please refer to section 3-8-1