jetway 915gdbr3a Benutzerhandbuch
14
Intel Reference Thermal Solution Disassembly
1.
Rotate fastener cap. turn to un-lock
2.
Pull up fastener cap to un-seat 12
1.
Disconnect fan cable from motherboard header
2.
Turn fastener caps (4) counter-clock wise
90degrees to the un-locked position
90degrees to the un-locked position
• A flat-bladed screwdriver may be used if required
3.
Pull up on fastener caps to unseat
4.
Manually remove HS with gentle twist motion.
5.
To re-assemble the HS, reset the fastener caps to
their original position with the slot perpendicular to
the HS. Then, follow the assembly instructions.
their original position with the slot perpendicular to
the HS. Then, follow the assembly instructions.
Note
: Thermal grease should be reapplied
TIM and Grease Removal from CPU
1
2
3
4