jetway polaris400 Benutzerhandbuch

Seite von 48
 
 
 
                                                                                                                                                                                                                                                                                                                                                
 
 
 
 
   
    
 
Keyboard Password Clear Jumper Setting 
2-3 closed    Keyboard Password Clear
JP8
1
3
JP8
1
3
1-2 closed  Normal 
 
(4)  CMOS RAM Clear (3-pin) : JBAT 
A battery must be used to retain the motherboard configuration in CMOS RAM short  
1-2 pins of JBAT to store the CMOS data. 
To clear the CMOS, follow the procedure below: 
1.
  Turn off the system and unplug the AC power 
2.
  Remove ATX power cable from ATX power connector 
3.
  Locate JBAT and short pins 2-3 for a few seconds 
4.
  Return JBAT to its normal setting by shorting pins 1-2 
5.
  Connect ATX power cable back to ATX power connector 
Note: When should clear CMOS 
1.  Troubleshooting 
2.  Forget password 
3.  After over clocking system boot fail 
   
 
 
CMOS RAM Clear Setting 
2-3 closed  Clear CMOS 
JBAT
1
JBAT
1
3
1-2 closed  Normal 
 
 
2-3  Install CPU 
2-3-1  Glossary  
Chipset (or core logic) - two or more integrated circuits which control the interfaces between the 
system processor, RAM, I/O devises, and adapter cards.  
Processor slot/socket - the slot or socket used to mount the system processor on the motherboard. 
Slot (AGP, PCI, ISA, RAM) - the slots used to mount adapter cards and system RAM.  
AGP - Accelerated Graphics Port - a high speed interface for video cards; runs at 1X (66MHz), 2X 
(133MHz), or 4X (266MHz).  
PCI - Peripheral  Component  Interconnect - a high speed interface for video cards, sound cards, 
network interface cards, and modems; runs at 33MHz.  
ISA - Industry Standard Architecture - a relatively low speed interface primarily used for sound cards 
and modems; runs at approx. 8MHz.