Barnett Crossbows revolution avi Benutzerhandbuch

The Revolution AVi is equipped with an automatic, 

ambidextrous safety, which engages every time the crossbow 

is cocked. The safety must be released before each shot. This, 

as with any other mechanical device, does not guarantee total 

safety, as no safety device is a substitute for common sense and 

safe handling. The crossbow trigger is only to be pulled when 

the safety is in “fire” position and NEVER when it is in the “safe” 

position or anywhere between “safe” and “fire.” Do not attempt to 

alter or modify the safety or the trigger mechanism.
The following rules should be followed at all times:
EXTREME CAUTION SHOULD BE USED AT ALL TIMES WHEN 

COULD RESULT IN SERIOUS INJURY OR DEATH.
• Always keep your fingers below the flight track and out of 

the path of cables and strings when firing the crossbow. The 

velocity of the string striking your fingers as the string travels 

forward could cause severe personal injury.

• Never dry-fire the crossbow (shooting without an arrow or too 

light of an arrow). Dry firing will void the warranty and can 

result in damage to the limb assembly and possibly cause 

personal injury.

• Never fire the crossbow until you are sure of your target.
• Always use an adequate target and backstop when target 

shooting.

• Always use suitable crossbow arrows, such as Barnett’s 22” 

Carbon Arrows with half moon nocks made by BARNETT for the 

Revolution AVi. Arrows of improper stiffness or mass weight 

may damage the limb and cable assembly, voiding the warranty 

and possibly cause personal injury.

• Always inspect the crossbow and arrows before firing. Bent or 

damaged arrows are not safe to fire and should be discarded  

or repaired.