King Technology pool frog above ground mineral system Benutzerhandbuch
Start-up and Operation
•
Do not add shock in or near the skimmer or into the
POOL FROG
®
Cycler as it could damage equipment, risk
potential explosion or discolor your pool surface.
•
Add a stabilizer or conditioner to
the pool at the beginning of the
season if the stabilizer level is below
20 ppm. This will prevent chlorine
burn off. Follow manufacturer’s
directions carefully.
season if the stabilizer level is below
20 ppm. This will prevent chlorine
burn off. Follow manufacturer’s
directions carefully.
•
Install a POOL FROG
®
Mineral
Reservoir into the POOL FROG
®
Cycler. (Follow directions on page 7.)
REPLACE THE POOL FROG
®
MINERAL RESERVOIR EVERY
6 MONTHS OR AFTER ONE
POOL SEASON WHICHEVER
IS SHORTER.
6 MONTHS OR AFTER ONE
POOL SEASON WHICHEVER
IS SHORTER.
•
When chlorine reading is down
to 1.0 ppm, which may take a few
days, insert POOL FROG
days, insert POOL FROG
®
Bac
Pac. (
Follow directions on page
9.)
1.
6.
2.
3.
4.
5.
•
Replace cap and run POOL
FROG
®
Cycler, with
POOL FROG
®
Mineral Reservoir inserted, for 10
minutes on Setting 10.
•
For an Algae Protection
Guarantee insert FROG BAM
®
into POOL
FROG
®
Mineral
Reservoir in POOL FROG
®
Cycler.
(Follow directions on page 8.)
•
Shock the pool with chlorine to rid
the water of all contaminants before
beginning with POOL FROG
beginning with POOL FROG
®
.
Follow
manufacturer's directions carefully.
•
THIS STEP IS VERY IMPORTANT
TO START-UP.
USE CHLORINE SHOCK ONLY.
USE CHLORINE SHOCK ONLY.