multicoat acrathane Benutzerhandbuch
High Quality Decorative
Protective Sealers.
DESCRIPTION AND USE
Multicoat ACRATHANE COLORSEAL
consists of a series of high quality waterbase
modified resins that provide a high quality,
durable seal.
ACRATHANE COLORSEAL is designed for
application to Multicoat KRETE KOTE, TOP
COAT, and other cementitious surfaces. It
provides tough, durable and wear resistant
protection to surfaces subject to heavy foot
and moderate vehicular traffic.
ADVANTAGES
●
Long Wearing
●
Enhances Appearance
●
Easy to clean - Minimal Maintenance
●
Multiple color availability
●
Clear Gloss and Clear Satin finishes
available
●
Weather and chemical resistant
●
Waterbase - Environmentally safe to apply
●
Excellent for Resealing and Coloring Old
Kool Deck
SURFACE PREPARATION
All surfaces to which COLORSEALS are applied must be clean, free of
grease, oil, dirt, dust, laitence, curing compounds, other foreign mate-
rials which may prevent bonding, and must be completely dry prior
to COLORSEAL application.
to COLORSEAL application.
Multicoat KRETE KOTE and TOP COAT must be allowed to set up
and cure for at least 24 to 48 hours before COLORSEAL application.
New concrete should be allowed to cure for a minimum of 20 days,
and be free from curing compounds, release agents if any, and other
water repellent materials which may prevent proper bonding.
APPLICATION
Multicoat COLORSEALS must be applied in two thin coats.
First Coat - Mix COLORSEAL to uniformity with slow speed mixer. With
continuous mixing, add clean water in ratio of 1 part water to 3 parts
COLORSEAL. Apply diluted COLORSEAL with nap roller with very firm
pressure. (
1
⁄
2
” nap roller for smooth and
3
⁄
4
” nap roller for rough
surfaces.) Allow a minimum of one (1) hour to dry.
(Note: ACRATHANE Clear Sealers are applied in one or
two coats full strength. DO NOT DILUTE.)
two coats full strength. DO NOT DILUTE.)
Second Coat - DO NOT DILUTE COLORSEAL! Mix to uniformity only.
Apply with firm pressure. DO NOT APPLY THICKER THAN
RECOMMENDED! Airless sprayer may be used for final coat.
ACRA
THANE COLORSEAL
THANE COLORSEAL
DILUTED FIRST COAT APPLIED WITH ROLLER
FULL STRENGTH SECOND COAT APPLIED WITH
ROLLER OR AIRLESS SPRAYER