Carvin 1562 Benutzerhandbuch

Our standard cable for speaker hookups is the PH50.  This cable features 1/4”

plugs and 16 gauge copper wire.  The PH50 is adequate for lengths up to 50’ under
normal use.  You can DAISY-CHAIN up to one additional speaker per cable by using
the unused 1/4” OUTPUT” jack (right side) on your speaker jack plate.  Be sure to
note the total impedance to the amp so it is not lower than it’s recommended
impedance.  See

Typical Loudspeaker Impedance Configurations. 

For continuous high power applications, we suggest using our professional

SPK25, SPK50 & SPK100 Speakon™ cables with lock-on connectors and heavy 4
conductor 12 gauge copper wire.  These cables are to be connected in the same
way as the PH50 with compatible amps.

1)  DO NOT EXCEED THE POWER RATING marked on the rear connect plate.

Excessive power will destroy drivers.  2)  DISTORTION from power amps will destroy
drivers much faster than clean power.  3)  WATER, MOISTURE, and DUST are
harmful to drivers causing failure which is not covered under warranty.  

CARVIN loudspeakers are covered by a ONE year limited warranty unless

otherwise stated.  Warranty coverage is limited to original manufactures defects
only.  WARRANTY DOES NOT COVER: 1) Opened or burned voice coils.  2) Torn
cones caused by improper packing or abuse.  3) Damage from rain, moisture, ETC.
When returning defective driver(s), remove them from the enclosure to reduce
shipping costs .  DO NOT stuff paper into the driver(s).  Return pre-paid by UPS.
Include your address and description of the problem.  Your driver(s) will be
returned COD for the cost of shipping and reconditioning if not covered under
warranty.

Frequency Response: 40 Hz to 19 kHz ±3 dB

Useable Low Frequency: 50 Hz (-10 dB)

Power Handling: 600w Continuous Power

Recommended Amp: 75 to 1000 watts

Sensitivity: 102 dB SPL, 1 Watt @ 1 meter

Coverage Angles: 90° Horizontal, 45° Vertical

Nominal Impedance: 4

Ω

Crossover Type: C1562 Constant Voltage

Inputs/Outputs: Two 1/4", two Speakon™ 

Bi-Amp Support: Yes—Panel Switch

Horn Driver Protection: Yes—Maintenance Free

Woofer Enclosure Type: Vented Box

Enclosure Covering: Black Duratuff II™

Dim/Wt: 17"W x 15.25"D x 44.25"H, 75lbs.

Optional Cables: PH50, SPK25, SPK50, SPK100

CARVIN ENGINEERING DATA

Congratulations on your selection of the 1562 loudspeaker. As one of the finest

speaker systems made, the TR1562 will reproduce your music with the purest, most
natural sound available.  The high powered titanium horn and two 15” woofer response
even under the most stressful, intense power levels.  The computer-aided tuned-ported
enclosures offer the best frequency response possible from the heavy-duty cast frame
15” woofer.  Hookups are easy too, with either 1/4” jacks or professional Speakon™
connectors as a Bi-amped or full-range system.  We recommend our 18’ TR1801 sub-
woofer system if you require more bass.

INSPECT YOUR SPEAKER FOR ANY DAMAGE which may have occurred during

shipping. If any damage is found, please notify the shipping company & CARVIN. 

SAVE THE CARTON & ALL PACKING MATERIALS.  In the event you have to re-ship

your unit, always use the original carton and packing material. This will provide the best
possible protection during shipment.  CARVIN and the shipping company are not liable
for any damage caused by improper packing.  

SAVE YOUR INVOICE.  It will be required for warranty service if needed in the future. 

SHIPMENT SHORTAGE.  If you find items missing, they may have been shipped

separately.  Please allow several days for the rest of your order to arrive before inquiring.

RECORD THE SERIAL NUMBER on the enclosed warranty card or below on this

manual for your records.  Keep your portion of the card and return the portion with your
name and comments to us.

Raise the enclosure to the ear level of your audience for greater coverage.  To help

control feedback, use a graphic equalizer.  Keep the speakers in front of the
microphone.  Never direct the microphone towards the speaker. For greater
coverage, add a second speaker system 20° to 30° off axis.

Individual speaker or speaker cabinet wiring examples for total impedance.

For your records, you may wish to record the following information.

Serial No._____________________  Invoice Date_______________

Ω

+

+

+

Ω

+

+

+

Ω

Ω

+

+

+

+

+

+

+

8

Ω

8

Ω

8

Ω

8

Ω

8

Ω

8

Ω

8

Ω

4

Ω

8

Ω

8

Ω

16

Ω

8

Ω

8

Ω

Two standard 1/4” phone

jacks and two Professional
Speakon™  connectors are
featured.  See other side for
hookup diagrams.

76-01562   0998

12340 World Trade Drive, San Diego, CA  92128

(619) 487-1600   (800) 854-2235

www.carvin.com

4

Ω

4

Ω

4

Ω

2

Ω

4

Ω

4

Ω

4

Ω

4

Ω

4

Ω

4

Ω

4

Ω

4

Ω

4

Ω

4

Ω

8

Ω