baby-lock evolve Benutzerhandbuch

O

V

E

R

V

I

E

W

16

2-Thread Subsidiary Looper 

Either needle thread may be engaged for 2-thread overlock sewing

1.  Open  the  front  cover  and  the  blade  cover,  cut  the  upper  looper

thread  just  above  the  threading  port  (fig.  A).  Raise  the  presser

foot and pull out the clipped thread from under the foot.

Remove the upper looper thread from the machine.

2.  Rotate  the  handwheel  to  bring  the  upper  looper  to  its  lowest

position.

3. Rotate the subsidiary looper up and to the left (fig. B), insert the

end into the upper looper eye (fig. C).

4.  Close the blade cover and the front cover.

Upper and Lower Looper Thread Fine-Tuning 

No  adjustments  are  needed  when  sewing  with  most  fabrics  and

threads on your Baby Lock evolve, but certain threads or fabrics may

require minor fine-tuning of the looper delivery system to perfect your

stitches.  Increase or decrease the delivery of the looper threads with

the upper and lower looper thread fine-tuning screw.   With a screw-

driver (found in accessory kit), turn the fine-tuning screw clockwise to

tighten the looper threads equally. 

 

Turn the screw counter-clockwise

to loosen the looper threads equally.

Ideal Stitch

Standard Position

Upper and lower

looper threads are

too loose.

Tighten the screw 

(+)

loosen the screw (-)

Upper and lower

looper threads are

too tight.