baby-lock evolve Benutzerhandbuch

O

V

E

R

L

O

C

K

S

T

I

T

C

H

E

S

E

X

P

R

E

S

S

42

3-thread Rolled Wave Stitch

1. Move the Wave Selector lever from "O" to "W".

2. Cut the threads from the thread cones and remove from the thread paths.

3. Lock the machine for threading the loopers (See page 19.)

4. Place the right needle thread cone on the OVERLOCK NEEDLE 2 spool pin.

5. Slip  the  right  needle  thread  into  the  telescopic  thread  guide  directly  above  the  thread.    Follow  the  left

overlock needle threading path down to the right overlock needle.

6. Thread the O-2 needle using the needle threader. (See page 24.)

7. Place the upper looper thread cone on the upper looper spool pin.

8. Slip the upper looper thread into the telescopic thread guide directly above the thread.  Follow the top

threading  path  for  the  right  overlock  needle  thread,  down  the  front  threading  path,  to  the  left  of  the

chrome thread guide, and directly to the "U" jet air threading port for the upper looper.   Set the Looper

Threader Selector on "U".  Thread the upper looper.  (See page 20.)

9. Place the needle thread and upper looper thread under the presser foot and to the back.

10. Place the lower looper thread cone on the lower looper spool pin.

11. Slip  the  lower  looper  thread  into  the  telescopic  thread  guide  directly  above  the  thread,  then  slip  the

thread  into  the  chain  looper  telescopic  thread  guide  to  avoid  the  thread  getting  tangled  while  sewing.

Take  the thread through the standard lower looper threading path to the "L" jet air threading port for the

lower looper.  Set the Looper Threader Selector on "L".  Thread the lower looper.  (See page 20.)

12. Set Stitch Selector on "C" for Rolled Wave Stitch.

13. Set Stitch Length and Stitch Width following the illustration below.

NEEDLES

O-2

LENGTH

1.0-1.5R

WIDTH

3.0-5.0

STITCH

SELECTOR

C

WAVE

SELECTOR

W