Becker indianapolis Bedienungsanleitung
181
User settings
AUX input (Aux)
This can be used to switch on the CD
changer AF connections if no CD chang-
er is connected. An external unit (Disc-
man, Walkman, etc.) can then be
connected.
changer AF connections if no CD chang-
er is connected. An external unit (Disc-
man, Walkman, etc.) can then be
connected.
X
To set, call up user menu.
X
By pressing multifunction button
, call up the 2nd level of the User
menu.
X
With multifunction button
, se-
lect either AUX Mode on (On) or Aux
Mode off (Off).
Mode off (Off).
The setting is stored automatically.
In CD mode, multifunction button
must be pressed to select AUX mode.
In CD mode, multifunction button
must be pressed to select AUX mode.
Display compass (Cmp)
When the navigation is not active, it is
possible to have a compass and the cur-
rent time shown on the right side of the
display.
possible to have a compass and the cur-
rent time shown on the right side of the
display.
X
To set, call up user menu.
X
By pressing multifunction button
, call up the 2nd level of the User
menu.
X
With multifunction button
, se-
lect either Show compass (Compass is
displayed) or Hide compass (Compass
is not displayed).
displayed) or Hide compass (Compass
is not displayed).
If the compass display is switched off
and navigation is not currently active,
radio station abbreviations can be as-
signed to 9 multifunction buttons in FM-
DAS mode.
and navigation is not currently active,
radio station abbreviations can be as-
signed to 9 multifunction buttons in FM-
DAS mode.
The setting is stored automatically.
Signal tone volume (BeV)
The volume of signal tones (e.g. storage
confirmation) can be set using this func-
tion.
confirmation) can be set using this func-
tion.
X
To set, call up user menu.
X
By pressing multifunction button
, call up the 2nd level of the User
menu.
X
Press the
multifunction button.
With the right rotary control
, select
between
0
(Low) or
+5
(Loud).
The setting is stored automatically.