Panasonic kx-tvs325 Benutzerhandbuch
Subscriber’s Guide
45
4.18 Setting Telephone Numbers for Toll Saver
This feature allows you to assign up to 2 Caller ID numbers and a DID number
for Toll Saver (see "Toll Saver" in the Glossary). When you check your mailbox
from the assigned Caller ID numbers or by dialing the assigned DID number,
the VPS notifies you whether or not there is a new message in your mailbox by
changing the delayed answer time. You can reduce your telephone charges by
accessing your mailbox only when there is a new message.
for Toll Saver (see "Toll Saver" in the Glossary). When you check your mailbox
from the assigned Caller ID numbers or by dialing the assigned DID number,
the VPS notifies you whether or not there is a new message in your mailbox by
changing the delayed answer time. You can reduce your telephone charges by
accessing your mailbox only when there is a new message.
•
Depending on your telephone system, you can enter up to 32 digits
using the keys 0-9,
, and # for telephone numbers.
•
Please make sure you begin the telephone number with a Line
Access Code (to seize a CO line).
Access Code (to seize a CO line).
•
Important Note: When the VPS calls to a CO line via a PRI (ISDN
Primary Rate Access Interface) card of a Panasonic PBX, please
be sure to add "#" after the telephone number (1112223333 in the
example here):
Example: 9P1112223333#
Please contact your System Administrator for more explanation.
Primary Rate Access Interface) card of a Panasonic PBX, please
be sure to add "#" after the telephone number (1112223333 in the
example here):
Example: 9P1112223333#
Please contact your System Administrator for more explanation.
•
DID number setting for this feature is only available when the VPS
is connected to the following PBXs with DPT Integration (see "DPT
Integration" in the Glossary).
is connected to the following PBXs with DPT Integration (see "DPT
Integration" in the Glossary).
•
KX-TD816 (P311Q or higher)
•
KX-TD1232 (P211Q or higher)
•
KX-TD500 (V4M or higher)
•
If you cannot use this feature, cannot assign Caller ID numbers, or
cannot assign a DID number, ask your System Administrator or
System Manager. She might have disabled it.
cannot assign a DID number, ask your System Administrator or
System Manager. She might have disabled it.
Log into your
mailbox.
mailbox.
Press 4.
Subscriber’s
Main Menu
Main Menu
On-hook.
4
Press 5.
5
2
Press 2
to accept.
to accept.
FOR THE FIRST TIME
Enter the telephone
number and wait.
number and wait.
Telephone No.
Press 1
to change.
to change.
1
WHEN YOU WANT TO CHANGE THE TELEPHONE NUMBER
New Telephone No.
Enter the new telephone
number and wait.
number and wait.
or