Pentax AF 540 FGZ II Bedienungsanleitung
21
1
Flash coverage angle of this flash unit can be adjusted to match
the angle of view of the lens being used, which enables
effective distribution of the flash light.
1
Turn on the power switch (ON).
2
Press the zoom button (ZOOM) and set the zoom position
(flash coverage angle) to match the focal length of the lens
you are using.
Auto Zoom (Zoom)
If both the camera and lens are autofocus, you can
automatically set the flash coverage angle according to the
focal length of the lens by pressing the shutter release button of
the camera halfway down. The auto zoom function operates
while the exposure metering timer is operating (while information
is being displayed in the viewfinder).
1
If is displayed on the LCD panel, press the zoom button
(ZOOM) a number of times until
disappears. Note that
auto zoom (Zoom) is set when you turn on the flash unit.
Manual Zoom (
Zoom)
If one or both of the camera and lens are manual focus, you
must set the flash coverage angle manually.
1
Press the zoom button (ZOOM) to display , then press it
a number of times until the focal length, or wider, of the lens
being used is displayed on the LCD panel.
Flash Coverage Angle
Auto zoom
Manual zoom
AF360FZ_540FGZ.book Page 21 Friday, December 20, 2013 6:11 PM