Pentax AF 540 FGZ II Bedienungsanleitung

Wide-Angle Panel

This flash unit has a built-in wide-angle panel at the top of the

flash head.

Pull out the wide-angle panel from the top of the flash head and

cover the front of the flash head with it, if necessary.

• The wide-angle panel expands flash coverage angle for the

following lenses. The flash zoom position will be fixed at the

same position as the focal length of the lens below. 13 mm

(K series (APS-C)), 25 mm (645D), or 3 mm (Q series)

Test Flash

Before taking the picture, firing a test flash helps you to see how

shadows are cast on the subject.

Check that the flash is ready, then press the test button (TEST).

The test flash will discharge.
Cameras Capable of Test Flash Photography Using the

Camera’s Button

With the following cameras, a button on the camera can be used

instead of the test button (TEST) of this flash unit. This

operation can be carried out with either an attached flash unit or

a wireless flash unit. For information on how to arrange this,

refer to the operating manual of the camera.

*645D: You can use the illumination button. (Refer to “Custom Setting

Menu 34.” in the camera’s operating manual.)

Wide-angle panel

AF360FZ_540FGZ.book Page 54 Friday, December 20, 2013 6:11 PM