Panasonic PPDTH42LRG20B Bedienungsanleitung

Seite von 76
4
Safety Precautions
Warning
Mains plug and lead
 
To help avoid risk of electrical shock, fire, damage or injury, please follow the warnings below:
This TV is designed to operate on AC 220-240 V, 
 
50 Hz.
Insert the mains plug fully into the socket outlet.
 
Ensure that the mains plug is easily accessible.
 
Remove the mains plug when cleaning the TV.
 
Do not touch the mains plug with a wet hand.
 
Do not damage the mains lead.
 
Do not place a heavy 
• 
object on the lead.
Do not place the lead 
• 
near a high temperature 
object.
Do not pull on the lead. 
• 
Hold onto the mains plug 
body when disconnecting 
the plug.
Do not move the TV with the lead plugged into a 
• 
socket outlet.
Do not twist the lead, bend it excessively or 
• 
stretch it.
Do not use a damaged mains plug or socket outlet.
• 
Ensure the TV does not crush the mains lead.
• 
AC 220-240 V
50 Hz
IMPORTANT: THE MOULDED MAINS PLUG
FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This TV is supplied with a moulded three pin mains plug for your safety and convenience. A 5 amp fuse is fitted 
in this mains plug. Shall the fuse need to be replaced, please ensure that the replacement fuse has a rating of 5 
amps and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark 
ASA
 or the BSI mark 
 on the body of the fuse.
If the mains plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the mains plug must not be used until a replacement cover is obtained.
A replacement fuse cover may be purchased from your local dealer.
If the fitted moulded mains plug is unsuitable for the socket outlet in your home, then the fuse shall be 
removed and the mains plug cut off and disposed of safety. There is a danger of severe electrical shock 
if the cut off mains plug is inserted into any 13 amp socket.
If a new mains plug is to be fitted, please observe the wiring code as shown below.
If in any doubt, please consult a qualified electrician.
IMPORTANT: –  The wires in this mains lead are coloured in accordance with the following code: –
Blue: Neutral   Brown: Live
As the colours of the wire in the mains lead of this appliance may not correspond with 
the coloured markings identifying the terminals in your mains plug, proceed as follows.
The wire which is coloured BLUE must be connected to the terminal in the mains plug
which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal in the mains plug which 
is marked with the letter L or coloured RED.
Under no circumstances should either of these wires be connected to the Earth terminal of the 
three pin mains plug, marked with the letter E or the earth symbol 
.
How to replace the fuse
For plug type shown in example 1:
Lift out the removable fuse compartment with a screwdriver and replace the fuse, then refit 
securely into the mains plug (see example 1).
For plug type shown in example 2:
Lift open the fuse compartment, in the mains plug, with a screwdriver, and replace the fuse, 
then press the fuse cover down securely (see example 2).
Example 1
Example 2
If you detect anything unusual, 
immediately switch off the mains supply 
switch and remove the mains plug.