Panasonic PTD7600E Bedienungsanleitung

POSITION
SHIFT
SIZE

VID AUTO

BLANKING
KEYSTONE
EDGE BLENDING

:MENU SELECT
ENTER:SUB MENU

MAIN MENU
PICTURE
POSITION
LANGUAGE
OPTION
TEST PATTERN
SIGNAL LIST

:MENU SELECT
ENTER:SUB MENU

EDGE BLENDING
UPPER

OFF 128

LOWER

OFF 128

LEFT

OFF 128

RIGHT

OFF 128

MARKER

OFF

BRIGHT

:MENU SELECT
:ADJUST ENTER:CHANGE

Press the “ENTER” button.

The EDGE BLENDING screen will be displayed.

Specify the area to be adjusted with the

buttons.

To joint the top: set “UPPER” to “ON”.
To joint the bottom: set “LOWER” to “ON”.
To joint the left: set “LEFT” to “ON”.
To joint the right: set “RIGHT” to “ON”.

Press the “ENTER” button to toggle
“ON” and “OFF”.

Adjust the correction width with the

buttons.

Select “MARKER” with the
buttons.

Press the “ENTER” button to set it to
“ON”.

The optimal point is where
these lines overlap.

Adjustment marker
When the “MARKER” is set to “ON”, the image position adjustment
marker is displayed.
Green lines are shown on the top and the left of the displayed picture
frame and red lines are displayed on the right and the bottom.
The optimal point is the position where the red line of one frame
overlaps the green line of the other frame.

Notice:

The correction widths of the jointed frames must be the same value
all the time.
The optimal joint cannot be achieved if the jointed frames have
different correction widths.

Edge blending adjustment

This projector has the function to hide the seams for multi-screens.

Procedure of adjustment

Note

Press the “MENU” button.

The MAIN MENU screen will be displayed.

Select the “POSITION” with the
buttons.

Press the “ENTER” button.

The POSITION screen will be displayed.

Select “EDGE BLENDING” with the

buttons.

Adjusting the position