Panasonic PTD7600E Bedienungsanleitung

96

• Is the power cord securely plugged in the receptacle?

• Is the MAIN POWER switch put to the “

O

” position?

• Is power supply live at the receptacle?

• Is the temperature monitor (TEMP) lamp on the projector front lighting or blinking?

(Refer to page 91.)

• Is the lamp monitor (LAMP) lamp on the projector front lighting or blinking? (Refer

to page 91.)

• Is the lamp unit housing door completely attached?

• Was operation of ID setting made in a correctly way? (Refer to pages 16 and 67.)

• Is the lens covered with the cap?

• Is the screen image input connected in a correct manner?

• Is the device(s) connected to the projector working normally?

• Is the shutter function used? (Refer to page 25.)

• Is the lens in focus? (Refer to page 37.)

• Is the projection distance adequate? (Refer to pages 19, 20.)

• Is the lens dirty?

• Is the projector placed vertical to the screen? (Refer to page 19.)

• Are colour strength and colour tint correctly adjusted? (Refer to page 49.)

• Is the device(s) connected to the projector adjusted correctly?

• Are dry batteries consumed?
• Is polarity correct in battery setting? (Refer to page 15.)
• Are there any obstacle between the remote control and the beam receiving

window? (Refer to page 15.)

• Are you trying to operate the remote control beyond the effective range? (Refer to

page 15.)

• Is the remote 2 (REMOTE2) terminal used for external control? (Refer to page 78.)
• Is any external light interfering with the remote control operation?
• Was operation of ID setting made in a correctly way? (Refer to pages 15 and 67.)

• Is the input selector set to correct position? (Refer to page 64.)

• Is the correct signaling system selected? (Refer to page 64, 65.)

• Are there any malfunctions on the source side, such as bad video tape?

• Are you supplying a signal that is not compatible with the projector? (Refer to page 99.)

• Is the cable too long?

• Is the correct signal destination set for notebook computer screen image?

Use 

and 

keys for setting. (For details, refer to the instruction manual of the

computer.)

F3

Fn