Panasonic TX58DXM710 Bedienungsanleitung

English

When the TV is turned on for the first time, it will 
automatically search for available TV channels and give 
options to set up the TV.

These steps are not necessary if the setup has been 
completed by your local dealer.

Please complete connections (p. 12 - 17) and settings 
(if necessary) of the connected equipment before 
starting Auto Setup. For information about the settings 
for the connected equipment, read the manual of the 
equipment.

Takes a few seconds to be displayed.

Set up each item by following the on-screen instructions.

Example:

Move the cursor

Access the item / store the setting

Return to the previous item (if available)

Select [Home] for use in a home viewing environment.

[Shop] is for shop display.

To change the viewing environment later on, the set 
will need to have all settings initialised by accessing 
Shipping Condition.

Depending on the country you select, select your 
Region or store the Child Lock-PIN number (“0000” 
cannot be stored).

:  tune (search for the available channels)

:  skip tuning

Auto Setup screen varies depending on the country 
and the signal mode you select.

[DVB-C Network Settings]

Normally set [Frequency] and [Network ID] to [Auto].

If [Auto] is not displayed or if necessary, enter 
[Frequency] and [Network ID] specified by your cable 
provider with numeric buttons.

If tuning has failed check the RF cable, and the network 
connection, and then follow the on-screen instructions.

The TV goes into Standby mode when no operation 
is performed for 4 hours if [Auto Standby] in the Timer 
Menu is set to [On].

The TV goes into Standby mode when no signal is 
received and no operation is performed for  
10 minutes if [No signal Power off] in the Timer Menu 
is set to [On].

To retune all channels  

To add the available TV signal mode later  

To initialise all settings