Panasonic TX55CSW524 Bedienungsanleitung
Timer Programming
This function allows you to select programmes that you want to be reminded
to watch or record to the USB HDD.
1. Select the forthcoming programme and press
1. Select the forthcoming programme and press
OK
to access.
2. Select
USB HDD Rec.
/
Reminder
and press
OK
to set.
●
To check / change / cancel a timer event
●
LED turns to orange in Standby mode when
Timer Programming
is set.
●
To return to
TV Guide
BACK/RETURN
●
If you select the current programme, a confirmation screen asking
whether you want to watch or record the programme appears. Select
Timer Programming
and press
OK
to set
USB HDD Rec.
to record from
the time you finish the timer event setting.
●
is displayed on the TV Guide screen if
Timer Programming
is set
from
TV Guide
.
●
Depending on the country you select, you can set
Signal Supported
Recording
(see below).
= Note =
●
Not valid in Analogue
●
Timer Programming
only works reliably if correct time information is
received via the signal from the broadcaster or service provider.
●
No other channels can be selected while recording of
Timer Programming
is in progress.
●
When recording programmes to the USB HDD, be sure to format the USB
HDD and enable it to record in
USB Device Setup
.
■
Signal Supported Recording
Signal Supported Recording
is
Timer Programming
which is controlled by
information from the TV Guide; if programme start and end times are changed
by the broadcaster, the timer event will follow the change. Note that
Signal
Supported Recording
only works reliably if correct information is received
from broadcasters.
●
The availability of this function depends on the country and TV mode you
select.
●
is displayed on the timer event if
Signal Supported Recording
is set.
- 73 -