Panasonic TY-ST58PF20 Bedienungsanleitung
17
5.
Preparation of the shelf plate
Face the unpainted side (back side) of the shelf
plate upward and place it on a soft cloth or the
like. Align the positioning holes of the shelf plate
with the bracket protrusions to position the two
brackets for shelf plate , and attach them with
four wood screws through the outside holes.
plate upward and place it on a soft cloth or the
like. Align the positioning holes of the shelf plate
with the bracket protrusions to position the two
brackets for shelf plate , and attach them with
four wood screws through the outside holes.
(Tightening torque: 1 to 1.2 N•m)
* Do not excessively fasten the wood screws to
prevent stripping screw holes. If a screw hole is
stripped, use spare holes.
stripped, use spare holes.
4.
Attachment of brackets for plasma
display (top/bottom)
display (top/bottom)
●
The attachment position differs according to the size
of the plasma display to be set up.
(The figure on the right covers setting up a 50-inch
TV.)
(The figure on the right covers setting up a 50-inch
TV.)
Hang the tabs of the top bracket for plasma display
to the cutouts for temporarily holding the
bracket for plasma display located on the front of
the left and right support columns. Fasten with four
screws for attaching bracket for plasma display
from the side.
the left and right support columns. Fasten with four
screws for attaching bracket for plasma display
from the side.
(Tightening torque: 2 to 3 N•m)
* See the figure on the right for attachment positions.
Hang the tabs of the bottom bracket for plasma
display to the cutouts for temporarily holding
the bracket for plasma display located on the
front of the left and right support columns. Fasten
with four screws for attaching bracket for plasma
display from the side.
the bracket for plasma display located on the
front of the left and right support columns. Fasten
with four screws for attaching bracket for plasma
display from the side.
(Tightening torque: 2 to 3 N•m)
* See the figure on the right for attachment positions.
English
42
50
58
42
50
58
50
For 42-inch
display
For 50-inch
For 50-inch
display
For bottom bracket
For top bracket
Wood screw
Spare
holes
(Inside)
holes
(Inside)
Bracket for
shelf plate
shelf plate
Shelf
plate
plate
Cutouts for temporarily
holding the bracket for
plasma display
Tab
Support column
(right)
(right)
Support column
(left)
(left)
Top bracket for plasma display
Cutouts for temporarily
holding the bracket for
plasma display
Bottom bracket for
plasma display
plasma display
For 42-inch
display
For 50-inch
For 50-inch
display
For 58-inch
display
For 58-inch
display
Screw for attaching
bracket for plasma
display
bracket for plasma
display
Screw for attaching
bracket for plasma
display
bracket for plasma
display
Bottom bracket for
plasma display
plasma display
Top bracket for plasma display