Panasonic ERGB80 Bedienungsanleitung

Seite von 280
10
English
Chargingthetrimmer
• Make sure that the trimmer is turned off.
1
1
Connecttheapplianceplugto
theappliancesocket.
2
2
Plugintheadaptorintoa
householdoutlet.
 
• Check that the charge status lamp glows.
 
• Charging is completed after approx. 
1 hour.
1
2
3
3
Disconnecttheadaptorwhenthechargestatus
lampstopsglowing.
 
• Recommended ambient temperature for charging is 
0 – 35 °C. Battery performance may decrease under 
extremely low or high temperatures, and the battery may 
not be charged properly.
 
• A full charge supplies enough power for approximately 
50 minutes of use. 
The operating time may differ depending on the frequency 
of use, the operating method and the ambient temperature.
 
• When charging the trimmer for the first time or when it has 
not been in use for more than 6 months, the lamp on the 
main body may not glow for a few minutes, or the operating 
time may shorten. Please charge it for more than 8 hours in 
such cases.
ACoperation
If you connect the AC adaptor to the trimmer in the same way as 
for charging, and turn on the power, you can use it.
• If the remaining battery is too low, the blades may move slowly or 
stop, even with the AC operation. In this case, charge the battery 
for 1 minute or more.
• The battery will be discharged, even with the AC operation.
Usingthetrimmer
• Make sure that the trimmer is turned off.
• We recommend using the trimmer in an ambient temperature 
range of 0 – 35 °C. If used outside this range, the appliance may 
stop operating.
1
1
Mountthedesiredcombattachmentandadjust
thetrimmingheightasneeded.(Seepage11.)
 
• It can also be used without the comb attachment. 
(Trimming height: approx. 0.5 mm)
 
• Actual hair length will be a little longer than the height you 
set.
2
2
Pressthepowerswitchtoturnon
thepower.