Panasonic RXD55EG Bedienungsanleitung

Seite von 28
6
6
ENGLI
S
H
ES
P
A
Ñ
O
L
RQTX1041
 Using the FM/AM radio 
  Manual tuning 
  Manual tuning 
 Press [FM/AM] to select “FM” or “AM”. 
 Press [TUNE MODE] to select “MANUAL”.  
RX-D55
 If “PGM” is displayed, press [TUNE MODE] to clear it.  
RX-D50
 Press [
2/3] or [5/6] (main unit: [/2] or [6/+]) to select 
the frequency of the required station. 
 To tune automatically 
 Press and hold [
2/3] or [5/6] until the frequency starts changing 
rapidly. The unit begins auto tuning, stopping when it fi nds a station. 
•  Auto tuning may not function when there is excessive interference. 
•  To cancel auto tuning, press [
2/3] or [5/6] once again. 
 To improve reception 
 FM: Extend the whip antenna and adjust its direction. 
 AM: Adjust the position of the unit. 
  To improve FM sound quality 
 When “FM” is selected 
 Press [FM MODE] to display “MONO”. 
 To cancel 
 Press [FM MODE] again. 
•  MONO is also cancelled if the frequency is changed. 
•  Turn off “MONO” for normal listening.   
  Memory preset 
  Memory preset 
 Up to 16 stations each can be set in the FM and AM bands. 
 
 Preparation 
 Press [FM/AM] to select “FM” or “AM”. 
  Automatic presetting 
RX-D55
 Press [PLAY MODE] repeatedly to select either “CURRENT” or 
“LOWEST”. 
CURRENT
Tuning begins from the current frequency.
LOWEST
Tuning begins from the lowest frequency.
 Press [AUTO PRESET] to start presetting. 
RX-D50
 Press [AUTO PRESET] to start presetting. 
 The tuner presets all the stations it can receive into the channels in ascending 
order. When fi nished, the last station memorised is tuned in.  
  Manual presetting 
 Press [PROGRAM] 
RX-D55
 ([MANUAL PRESET] 
RX-D50
). 
 “PGM” is displayed. 
 Within 10 seconds or so 
 Press [
2/3] or [5/6] to tune to 
the required station. 
 Press [PROGRAM] 
RX-D55
 ([MANUAL PRESET] 
RX-D50
). 
 Press the numeric buttons to select a channel. 
 The station occupying a channel is erased if another station is preset to that 
channel. 
 Repeat steps 2 to 4 to preset more stations.  
  Selecting a preset station 
 Press the numeric buttons to select a channel. 
 For channels 10 to 16 press [ 10], then the two digits. 
 OR 
 Press [TUNE MODE] to select “PRESET”.  
RX-D55
 Press [TUNE MODE] to display “PGM”.  
RX-D50
Press [
2/3] or [5/6
(main unit: [– /
2] or [6/+]) to select the 
channel.
Preset channel
 USB 
(
RX-D55
 only) 
 The USB connectivity enables you to connect and play MP3 tracks from USB 
mass storage class. Typically, USB memory devices (bulk only transfer). 
  Connecting a USB mass storage device 
  Connecting a USB mass storage device 
 
 Preparation 
 Before connecting any USB mass storage device to the unit, ensure that the 
data stored therein has been backed up. 
 It is not recommended to use a USB extension cable. The device connected via 
the cable will not be recognised by this unit. 
USB enabled 
device
(not included)
  Playing a USB mass storage device 
 Reduce the volume and connect the USB mass storage device to the 
USB port. 
 Press [
4/9, USB] to start play. 
Stop playback
 Press [
8] (stop) during play. 
 “RESUME” is displayed. The position is memorised. 
 Press [
4/9, USB] to resume play. 
 Press [
8] (stop) again to clear the position. 
Pause play
 Press [
4/9, USB] during play. 
 Press again to resume play. 
Skip tracks
Press [
2/3] or [5/6] (main unit: [–/2] or 
[
6/+]).
Skip album
 Press [
R/T, ALBUM] in the play mode. 
 Press [
R/T, ALBUM] once and then the numeric 
buttons in the stop mode. 
  Recording from a USB mass storage device 
 Press [
2/3] or [5/6] (main unit: [/2] or [6/+]) to select 
the desired track for recording. 
 Press [
V
] on the main unit to start recording. 
 
 Note 
 When you connect your digital audio player to the USB port, it charges all the 
time except in standby mode. 
 
 NOTE on USB 
 Compatible devices 
 Devices which are defi ned as USB mass storage class: 
•  USB devices that support bulk only transfer. 
•  USB devices that support USB 2.0 full speed. 
 Supported format 
•  Folders are defi ned as album. 
•  Files are defi ned as track. 
•  Track must have the extension “.mp3” or “.MP3”. 
•  CBI (Control/Bulk/Interrupt) is not supported. 
•  A device using NTFS fi le system is not supported. [Only FAT 12/16/32 
(File Allocation Table 12/16/32) fi le system is supported.] 
•  Depending on the sector size, some fi les may not work. 
•  Maximum album: 255 albums 
•  Maximum track: 2500 tracks 
•  Maximum track in one album: 999 tracks   
  AM allocation setting 
  AM allocation setting 
 By main unit only 
 This system can also receive AM broadcasts allocated in 10 kHz steps. 
 To change the step from 9 kHz to 10 kHz 
 Press and hold [FM/AM]. 
 After a few seconds the display changes to a fl ashing display of the current 
minimum frequency. 
 Continue to hold down [FM/AM]. 
•  When the minimum frequency changes, release the button. To return to the 
original step, repeat the above steps. 
•  After the setting is changed, any previously preset frequency will be 
cleared.  
RQTX1041-2Z_1gb.indd   6
RQTX1041-2Z_1gb.indd   6
4/8/2010   2:23:13 PM
4/8/2010   2:23:13 PM