Benq PB6100 Benutzerhandbuch

Seite von 9
 
BenQ PROJECTOR 
CEILING MOUNT GUIDE 
 
 
 
TABLE OF CONTENTS
 
Packing Parts List.................................................................................................................................................................... 2
 
Projector Installation and Throw  Distance  Chart ............................................................................................................ 3
 
Installing a Projector with The Ceiling Bracket................................................................................................................. 4
 
Adjusting the Ceiling Bracket............................................................................................................................................... 7
 
Specifications and Diagrams ................................................................................................................................................. 9
 
 
 
 
 
 
1. 
Follow the instructions in this manual when installing the projector with this bracket. Improper or 
inadequate installation could cause the projector to fall and injure someone. 
2. 
Make sure the projector is installed securely so that the bracket can bear the weight of all attached devices, 
and also withstand any vibration. 
3. 
Use only the parts provided with the rack, and any parts (commercially available) that are specified in this 
manual. 
4. 
Do not modify the bracket or the parts provided with the bracket. 
5. 
Do not use damaged parts. If any parts become damaged, contact your dealer. 
6. 
All bolts and screws must be tightened securely. 
7. 
Make sure not to block any ventilation openings when installing the projector. 
8. 
Do not install the projector in a location that is subject to high levels of dust or humidity. 
9. 
Do not install the projector in a location that is exposed to direct sunlight or in a location that is subject to 
extreme fluctuations in temperature (such as near an air conditioner). 
10.  Clean only with a dry cloth. 
11.  Special techniques and experience are required when installing the projector with this bracket. It is 
recommended that you contact your dealer to install the projector. 
12.  Once the projector is installed, safety checks should be performed on a regular basis. 
SAFETY INSTRUCTIONS