Panasonic KXTG8564EB Bedienungsanleitung
2
MbN: Select the entry to be barred. a
a
3
MbN: “Caller Barred” a
4
MbN: “Yes” a
a M
N
n
By entering phone numbers:
1
(middle soft key) #217 a
2
Enter the phone number (24 digits
max.). a
R To erase a digit, press
max.). a
R To erase a digit, press
.
3
M
N
Viewing/editing/erasing bar call
numbers
numbers
1
(middle soft key) #217
2
MbN: Select the desired entry.
R To exit, press M
R To exit, press M
N.
3
To edit a number:
a Edit the phone number. a
a M
N
To erase a number:
a MbN: “Yes” a
a M
N
Note:
R When editing, press the desired dial key to
R When editing, press the desired dial key to
add,
to erase.
Setting call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
1
(middle soft key) #256
2
Enter the base unit PIN (default: “0000”).
R If you forget your PIN, see page 58.
R If you forget your PIN, see page 58.
3
Select the handsets to be restricted by
pressing 1 to 6.
R All handsets registered to the base unit
pressing 1 to 6.
R All handsets registered to the base unit
are displayed.
R “ ” is displayed next to the selected
handset numbers.
R To cancel a selected handset, press
the same dial key again. “ ”
disappears.
disappears.
4
5
5
Select a memory location by pressing 1
to 6. a
to 6. a
6
Enter the phone number or area code to
be restricted (8 digits max.). a
be restricted (8 digits max.). a
a
M
N
R To erase a restricted number, press
.
Changing the base unit PIN
(Personal Identification Number)
(Personal Identification Number)
Important:
R If you change the PIN, please make note of
R If you change the PIN, please make note of
1
(middle soft key) #132
2
Enter the current 4-digit base unit PIN
(default: “0000”).
(default: “0000”).
3
Enter the new 4-digit base unit PIN. a
a M
N
Calendar/Schedule
You can program 20 schedule alarms for each
handset using the calendar. A schedule alarm
sounds at the set time for 1 minute. A text
memo can also be displayed for the schedule
alarm.
Important:
R Set the date and time beforehand
handset using the calendar. A schedule alarm
sounds at the set time for 1 minute. A text
memo can also be displayed for the schedule
alarm.
Important:
R Set the date and time beforehand
(page 15).
R If the unit is connected to a PBX system,
date information may not be properly
received. Set the PBX system to receive
the correct date information. Contact your
PBX supplier if necessary.
received. Set the PBX system to receive
the correct date information. Contact your
PBX supplier if necessary.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
33
Programming
TG8561E(en-en)_0420_ver101.pdf 33
2012/04/20 14:29:12