Panasonic SC-PM31 Bedienungsanleitung

RQT7923

Getting started

Step 2

- Inserting batteries into the remote control

�

��

■

Batteries

• Insert so the poles (+ and –) match those in the remote control.

• Remove if the remote control is not going to be used for a long period of

time. Store in a cool, dark place.

• Do not use rechargeable type batteries.

• Mishandling of batteries can cause electrolyte leakage which can damage

items the ﬂ uid contacts and may cause a ﬁ re.

Do not:

• mix old and new batteries.

• use different types at the same time.

• heat or expose to ﬂ ame.

• take apart or short circuit.

• attempt to recharge alkaline or manganese batteries.

• use batteries if the covering has been peeled off.

■

Use

• Aim at the remote control sensor, avoiding obstacles, at a maximum range

of 7m (23 feet) directly in front of the unit

Refer to page 6 for the remote control sensor position.

Step 3

- DEMO function

When the unit is ﬁ rst plugged in, a demonstration of its functions may be shown

on the display.

If the demo setting is off, you can show a demonstration by selecting “DEMO

ON”.

Press and hold [STOP

7, –DEMO].

The display change each time the button is held down.

DEMO OFF

DEMO ON

While in standby mode, select “DEMO OFF” to reduce power consumption.

Placement of speakers

Speakers are designed identically so that no left or right channel orientation is necessary.

• These speakers do not have magnetic shielding. Do not place them near televisions, personal computers or other devices

easily inﬂ uenced by magnetism.

• To avoid damage to the speakers, do not touch the speaker cones if you have taken the nets off.
Note

• Keep your speakers at least 10 mm (

”)away from the system for proper ventilation.

Use only the supplied speakers.

• The combination of the main unit and speakers provide the best sound. Using other speakers can damage the unit and

sound quality will be negatively affected.

Caution

• Use the speakers only with the recommended system.

Failure to do so may lead to damage to the ampliﬁ er and/or the speakers, and may result in the risk of ﬁ re. Consult

a qualiﬁ ed service person if damage has occurred or if you experience a sudden change in performance.

• Do not attach these speakers to walls or ceilings.

PM31_7923-P.indd 5

11/30/04 6:51:27 PM