Panasonic KXFLB853FX Bedienungsanleitung
2. Preparation
22
Note:
L
When you operate the unit right after turning
the power switch ON or after leaving the unit
unused for a long period of time, the scanner
lamp (
the power switch ON or after leaving the unit
unused for a long period of time, the scanner
lamp (
2) will flash for a short while. The
scanner will also move instantaneously. This
is normal for the unit. After that, the scanner
lamp will remain ON (the default is for approx.
15 minutes, feature #403 on page 65).
is normal for the unit. After that, the scanner
lamp will remain ON (the default is for approx.
15 minutes, feature #403 on page 65).
2.3 Dialling mode
If you cannot dial (page 30), change this setting
depending on your telephone line service.
depending on your telephone line service.
1
Press {MENU}.
SYSTEM SETUP
PRESS [( )]
2
Press {#}, then {1}{2}{0}.
DIALLING MODE
=TONE
[V^]
3
Press {1} or {2} to select the desired setting.
{
{
1} “
PULSE”: For rotary pulse dial service.
{
2} “
TONE” (default): For tone dial service.
4
Press {SET}.
5
Press {MENU} to exit.
2
{
SET}
{
MENU}
FLB853FX-PFQX2355ZA-en.book Page 22 Friday, January 13, 2006 2:25 PM