Panasonic th-37pa20 Benutzerhandbuch
35
Tuning your VCR and satellite receiver
Your new TV is supplied with programme position ‘0’ set to receive an RF signal from your VCR, although a Scart
connection is preferable if the VCR is so equipped (see page 9, 10 or 45 for suitable inputs to the Scart socket on this
set).
However, if for some reason your VCR is tuned to a different RF channel then you will not receive any picture or sound
from your VCR on programme position ‘0’ of this set. Either adjust the tuning of this TV programme position ‘0’ (follow
the instructions below) or adjust the RF channel of your VCR (some VCRs allow adjustment of their RF channel via
their remote control unit) or both until this TV is tuned to the RF output channel of your VCR.
It is intended that this advice is used in conjunction with the instruction books for your additional equipment.
connection is preferable if the VCR is so equipped (see page 9, 10 or 45 for suitable inputs to the Scart socket on this
set).
However, if for some reason your VCR is tuned to a different RF channel then you will not receive any picture or sound
from your VCR on programme position ‘0’ of this set. Either adjust the tuning of this TV programme position ‘0’ (follow
the instructions below) or adjust the RF channel of your VCR (some VCRs allow adjustment of their RF channel via
their remote control unit) or both until this TV is tuned to the RF output channel of your VCR.
It is intended that this advice is used in conjunction with the instruction books for your additional equipment.
Tuning your TV to the VCR
Switch on the VCR, insert and play a pre-recorded tape with known content.
Notes:
• If picture patterning occurs on programme position ‘0’ , or any others, it
• If picture patterning occurs on programme position ‘0’ , or any others, it
may be necessary to adjust the RF output channel of the VCR, refer to the
VCR instruction book.
VCR instruction book.
• If a Satellite Receiver and a VCR are going to be used with RF cable
connections it is important to avoid both units being set on the same
channel.
Refer to the Satellite Receiver and VCR instruction books for precise tuning
information.
channel.
Refer to the Satellite Receiver and VCR instruction books for precise tuning
information.
• A VCR is used as an example. The above instructions also apply to other
equipments with RF output signal, e.g. DVD recorder, satellite receiver,
etc...
etc...
1
Press to display the Setup menu
screen.
screen.
2
Press to select the Tuning menu.
Press to Access the Tuning menu
screen.
screen.
3
Press to select the Manual tuning.
Press to Access the Manual
tuning screen.
tuning screen.
4
Press to select program position ‘0’
VCR.
VCR.
Press to start seaching for the
VCR playback of the known
content tape.
When the VCR playback is found,
VCR playback of the known
content tape.
When the VCR playback is found,
press
STR
to store.
Press to exit.
The tape with known content
is found and displayed.
Pressing
is found and displayed.
Pressing
STR
will store the
setting.
21 68
Manual tuning
TV/AV
’STR’ Button Store
’STR’ Button Store
E x i t
Serch
down / up
down / up
Programme
down / up
down / up
Return
CH44
VCR
VCR
Tuning menu
Q-Link
Side panel
Off
Power save
Off
Off timer
Off
Teletext
FASTEXT
AV2 out
TV
Setup menu
AV2
Access
Manual tuning
Programme edit
Auto setup
Auto setup
Access
Tuning menu
Decoder (AV2)
Shipping Condition
Shipping Condition
Owner ID
Off
N
1
2
3
4
5
6
7
8
9
0
C
SET UP
TV/AV