Panasonic KXMB2178HK Bedienungsanleitung
9.1 Availability of the network feature
Important:
R The network feature (LAN or wireless LAN) may not be available for your unit. See "y List of available
R The network feature (LAN or wireless LAN) may not be available for your unit. See "y List of available
9.2 Programming features: LAN
Feature
Code
Description
Default
key
key
DHCP mode
#500
When this feature is activated, the following will be allocated
automatically using a DHCP (Dynamic Host Configuration Protocol)
server.
– IP address
– Subnet mask
– Default gateway
automatically using a DHCP (Dynamic Host Configuration Protocol)
server.
– IP address
– Subnet mask
– Default gateway
M1N
IP address
#501
To set the IP address for the LAN connection. This feature is available
when feature #500 is deactivated.
when feature #500 is deactivated.
–
Subnet mask
#502
To set the Subnet mask for the LAN connection. This feature is
available when feature #500 is deactivated.
available when feature #500 is deactivated.
–
Default gateway
#503
To set the default gateway for the LAN connection. This feature is
available when feature #500 is deactivated.
available when feature #500 is deactivated.
–
DNS server #1
#504
To set the primary DNS server for the LAN connection. This feature
is available when feature #500 is deactivated.
is available when feature #500 is deactivated.
–
DNS server #2
#505
To set the secondary DNS server for the LAN connection. This feature
is available when feature #500 is deactivated.
is available when feature #500 is deactivated.
–
Machine name
#507
To set the machine name.
Enter the name of the unit to recognize on the LAN, up to 15
characters, using the English alphabet and numbers.
R The first and last letter must be an English alphabet or numbers.
R Hyphen can also be entered using M1N.
Enter the name of the unit to recognize on the LAN, up to 15
characters, using the English alphabet and numbers.
R The first and last letter must be an English alphabet or numbers.
R Hyphen can also be entered using M1N.
Note:
R In order to recognize the unit on the LAN, the default name of the
R In order to recognize the unit on the LAN, the default name of the
unit is assigned automatically. If you change the name, assign a
unique name to avoid overlapping.
unique name to avoid overlapping.
–
MAC address
#508
To display the MAC address of the unit.
–
Bonjour
#513
To set the Bonjour feature.
M1N
Network status
#526
–
IP filtering
#532
When this feature is activated, the unit will deny/approve access from
the pre-programmed IP patterns. You can program whether to deny
or approve IP addresses. Up to 4 patterns each for IPv4 and IPv6 can
be programmed through the web browser interface (page 93).
the pre-programmed IP patterns. You can program whether to deny
or approve IP addresses. Up to 4 patterns each for IPv4 and IPv6 can
be programmed through the web browser interface (page 93).
M0N
Auto IP
#533
To set the IP address automatically for the LAN connection. This
feature is available when feature #500 is activated. When this feature
is activated, IP address will be allocated automatically without using
a DHCP (Dynamic Host Configuration Protocol) server.
feature is available when feature #500 is activated. When this feature
is activated, IP address will be allocated automatically without using
a DHCP (Dynamic Host Configuration Protocol) server.
M0N
HTTPD
#534
To set HTTPD for the LAN connection. When this feature is activated,
you can access to the web server.
you can access to the web server.
M1N
90
9. . Network
9. Network