Panasonic VDRM75EB Bedienungsanleitung
139
Before Requesting Service
Check 1
No movie can be recorded
Movie can be recorded only on DVD-RAM or DVD-R
disc.
Check the following:
• Is the correct type of disc inserted?
• Is power switch set to “
disc.
Check the following:
• Is the correct type of disc inserted?
• Is power switch set to “
”?
• Is the DVD-RAM disc in DVD Video Camera write-
protected? Release the write-protect.
• If you are using a DVD-R, has it been finalized?
• Does disc have remaining recording space?
If movie still cannot be recorded after the above check
is clear, the disc may be damaged: use another disc.
• Does disc have remaining recording space?
If movie still cannot be recorded after the above check
is clear, the disc may be damaged: use another disc.
Check 2
No still can be recorded
Still can be recorded only on DVD-RAM disc or SD
Memory Card.
Check the following:
• Is the correct type of disc or card inserted?
• Is power switch set to match the recording medium?
Memory Card.
Check the following:
• Is the correct type of disc or card inserted?
• Is power switch set to match the recording medium?
−
When using DVD-RAM disc:
Set to “
Set to “
”.
−
When using SD Memory Card:
Set to “
Set to “
”.
• Is loaded DVD-RAM disc write-protected?
• When using SD Memory Card: is it locked?
• Does disc or card have remaining recording space?
If still cannot be recorded after the above check is
clear, the disc or card may be damaged: use another
disc or card.
• When using SD Memory Card: is it locked?
• Does disc or card have remaining recording space?
If still cannot be recorded after the above check is
clear, the disc or card may be damaged: use another
disc or card.
Check 3
Skip or search playback does
not work well
not work well
If the temperature inside the DVD Video Camera is
high, normal operation may not be possible. Turn the
DVD Video Camera off, wait for a few moments, and
then turn it on again for operation.
high, normal operation may not be possible. Turn the
DVD Video Camera off, wait for a few moments, and
then turn it on again for operation.
Check 4
• No operation can be
performed because the
ACCESS/PC or CARD
ACCESS indicator on this DVD
Video Camera remains lit or
blinking.
ACCESS/PC or CARD
ACCESS indicator on this DVD
Video Camera remains lit or
blinking.
• After disc or card is inserted, it
takes some time until
recording is possible.
recording is possible.
In the following cases, it will take more time than usual
until operation is possible:
• When a disc has just been inserted
• When the last action was to turn off the power, and
until operation is possible:
• When a disc has just been inserted
• When the last action was to turn off the power, and
a long period of time has passed since then
• When the temperature is greatly different from the
status of previous recording
• When disc with scratches, dirt or fingerprints is
inserted
• When disc is subject to severe vibrations
• When the battery or DC power cord was
• When the battery or DC power cord was
disconnected instead of following the correct
procedure using power switch to turn the DVD
Video Camera off
procedure using power switch to turn the DVD
Video Camera off
VDR-M75M55EB.book Page 139 Tuesday, May 17, 2005 10:32 AM