Panasonic VDRM75EB Bedienungsanleitung
34
Inserting Battery into Remote Control
Insert the provided lithium battery into remote control.
1
Pull the battery holder out towards yourself while
pressing a thin rod or other object into the PUSH
hole.
pressing a thin rod or other object into the PUSH
hole.
2
Insert the button type battery with the positive R
terminal facing down.
terminal facing down.
3
Slide the battery holder to close it.
Note
:
The life of lithium battery is approximately one year. If the
battery is discharged, no operation is possible with remote
control. Replace the battery.
battery is discharged, no operation is possible with remote
control. Replace the battery.
Removing Battery from Remote Control
1
Pull the battery holder out towards yourself while
pressing a thin rod or other object into the PUSH
hole.
pressing a thin rod or other object into the PUSH
hole.
Warning
:
•
KEEP THE BATTERY AWAY FROM CHILDREN AND
PETS.
PETS.
•
IF SWALLOWED CONSULT A PHYSICIAN
IMMEDIATELY FOR EMERGENCY TREATMENT.
IMMEDIATELY FOR EMERGENCY TREATMENT.
•
BATTERY MAY EXPLODE IF NOT HANDLED
PROPERLY. DO NOT RECHARGE, DISASSEMBLE
OR DISPOSE OF IN FIRE.
PROPERLY. DO NOT RECHARGE, DISASSEMBLE
OR DISPOSE OF IN FIRE.
Note
:
•
Replace the battery with a Panasonic CR2032. Use of
another battery may present a risk of fire or explosion.
another battery may present a risk of fire or explosion.
•
Dispose of battery safely in accordance with local laws.
Do not dispose of in fire.
Do not dispose of in fire.
•
Do not short circuit the battery.
•
Do not hold the battery with the metallic tweezers.
•
Keep the battery in a dark, cool, dry place.
Battery holder
WARNING
:
“THE LITHIUM BATTERY IS A CRITICAL COMPONENT
(TYPE NUMBER CR2032 MANUFACTURED BY
PANASONIC).
IT MUST NEVER BE SUBJECTED TO EXCESSIVE
HEAT OR DISCHARGE. IT MUST THEREFORE ONLY
BE FITTED IN EQUIPMENT DESIGNED SPECIFICALLY
FOR ITS USE.
REPLACEMENT BATTERIES MUST BE OF THE SAME
TYPE AND MANUFACTURER.
THEY MUST BE FITTED IN THE SAME MANNER AND
LOCATION AS THE ORIGINAL BATTERY, WITH THE
CORRECT POLARITY CONNECTIONS OBSERVED.
DO NOT ATTEMPT TO RE-CHARGE THE OLD
BATTERY OR RE-USE IT FOR ANY OTHER PURPOSE.
IT SHOULD BE DISPOSED OF IN WASTE PRODUCTS
DESTINED FOR BURIAL RATHER THAN
INCINERATION.”
(TYPE NUMBER CR2032 MANUFACTURED BY
PANASONIC).
IT MUST NEVER BE SUBJECTED TO EXCESSIVE
HEAT OR DISCHARGE. IT MUST THEREFORE ONLY
BE FITTED IN EQUIPMENT DESIGNED SPECIFICALLY
FOR ITS USE.
REPLACEMENT BATTERIES MUST BE OF THE SAME
TYPE AND MANUFACTURER.
THEY MUST BE FITTED IN THE SAME MANNER AND
LOCATION AS THE ORIGINAL BATTERY, WITH THE
CORRECT POLARITY CONNECTIONS OBSERVED.
DO NOT ATTEMPT TO RE-CHARGE THE OLD
BATTERY OR RE-USE IT FOR ANY OTHER PURPOSE.
IT SHOULD BE DISPOSED OF IN WASTE PRODUCTS
DESTINED FOR BURIAL RATHER THAN
INCINERATION.”
VDR-M75M55EB.book Page 34 Tuesday, May 17, 2005 10:32 AM