Panasonic KXHNS103 Bedienungsanleitung
Securing with double-sided tape only
Note:
R Make sure any surfaces that will make contact with the double-sided tape are
R Make sure any surfaces that will make contact with the double-sided tape are
clean and dry before applying the tape. When attaching the double-sided tape to
concrete or bricks, if the surface of the concrete or bricks is wet, make sure to
completely dry the surface before attaching the double-sided tape.
concrete or bricks, if the surface of the concrete or bricks is wet, make sure to
completely dry the surface before attaching the double-sided tape.
1
Remove the backing from the double-sided tape, attach the main unit and the
probe unit to the installation surface, and then press firmly on each unit to
ensure solid adhesion to the installation surface.
probe unit to the installation surface, and then press firmly on each unit to
ensure solid adhesion to the installation surface.
1
Double-sided tape
1
1
1
Note:
R To install the probe unit on a floor, see page 16.
R To install the probe unit on a floor, see page 16.
For assistance, please visit http://shop.panasonic.com/support
15
Setup
HNS103_(en_en)_0119_ver.101.pdf 15
2017/01/25 14:57:41