Panasonic CZ64ESMC2 Bedienungsanleitung
8
How to start group operation
To start group operation
Stop
Power
Turn the power supply switch on more than 5 hours before starting operation.
1
Press the SELECT button and select GROUP.
2
Select the ZONE No. including the group to be operated by pressing ZONE button.
3
Select the GROUP No. to be operated by pressing GROUP select buttons
.
4
Press the ON button.
5
Set the operation mode by pressing the MODE button.
6
Set the desired temperature by pressing one of the temperature setting buttons
.
7
Set the desired fan speed by pressing the FAN SPEED button.
8
Set the airfl ow direction to a specifi c angle or sweep mode.
9
By pressing
, select your desired setting.
Individual: Controls with the remote controller are possible.
Central 1: Individual ON/OFF operation with the remote controller is inhibited.
Central 2: Individual ON/OFF, MODE, and Temp, setting operations with the remote
Central 1: Individual ON/OFF operation with the remote controller is inhibited.
Central 2: Individual ON/OFF, MODE, and Temp, setting operations with the remote
controller are inhibited.
Central 3: Individual MODE and Temp, setting operations with the remote controller are
inhibited.
Central 4: Individual MODE operation with the remote controller is inhibited.
• Under Central/Individual settings other than listed above, “CENTRAL” is displayed.
• Under Central/Individual settings other than listed above, “CENTRAL” is displayed.
Stop
Confi rming the GROUP No. to be selected, press the OFF button.
• The fl ap setting can be performed only for units that have no remote controllers.
• AUTO
Depending on the difference between the temperature setting and
Operation: the room temperature, heating and cooling alternate automatically so that a
uniform room temperature is maintained.
NOTE
CZ-64ESMC2_all.indb 8
CZ-64ESMC2_all.indb 8
2011/09/07 14:37:50
2011/09/07 14:37:50