Panasonic KXFLB883FX Bedienungsanleitung
9. Programmable Features
66
Setting the font pitch/point in
PCL
{#}{
PCL
{#}{
7}{7}{0}
To set the font pitch/point to be used in PCL printing.
1. {MENU} i {#}{7}{7}{0} i {SET}
2. Enter the font pitch from “
00.44” to “99.99”, or the point from “004.00”
to “
999.75”, using the dial keypad.
L
The default pitch is “
10.00” and the default point is “012.00”.
3. {SET} i {MENU}
Setting the symbol set in PCL
{#}{
{#}{
7}{7}{1}
To set the symbol set to be used in PCL printing.
1. {MENU} i {#}{7}{7}{1}
2. Press {V} or {^} repeatedly to display the desired symbol set. i {SET}
i {MENU}
Setting the line breaks in PCL
{#}{
{#}{
7}{7}{2}
To set each behavior when receiving CR, LF, and FF codes.
{
{
1} “
CR/LF/FF” (default): CR=CR, LF=LF, FF=FF
{
2} “
CR+LF/LF/FF”: CR=CR+LF, LF=LF, FF=FF
{
3} “
CR/CR+LF/CR+FF”: CR=CR, LF=CR+LF, FF=CR+FF
Setting the waiting time for
auto continue mode
{#}{
auto continue mode
{#}{
7}{7}{3}
To set the length of time before the unit recovers if memory overflow occurs.
{
{
1} “
OFF” (default): Deactivates this feature.
{
2} “
20s”: 20 seconds
{
3} “
30s”: 30 seconds
{
4} “
60s”: 60 seconds
{
5} “
90s”: 90 seconds
{
6} “
120s”: 120 seconds
Changing the data timeout
setting
{#}{
setting
{#}{
7}{7}{4}
The unit will automatically print the remaining data in memory when the
computer does not send data to the unit during the set time.
computer does not send data to the unit during the set time.
1. {MENU} i {#}{7}{7}{4} i {SET}
2. Enter the desired data timeout setting from “
005” seconds to “600”
seconds, using the dial keypad.
L
The default setting is “
060” seconds.
3. {SET} i {MENU}
Feature/Code
Selection
FLB883FX-PFQX2770ZA-OI-en.book Page 66 Wednesday, September 26, 2007 10:41 AM