Panasonic kx-tg8280fx Bedienungsanleitung
– 8 –
Registering a handset to the base unit
The supplied handset and base unit are pre-registered. When you purchase an
additional handset, refer to the additional handset’s installation manual for
registration. If for some reason the handset is not registered to the base unit, register
the handset.
additional handset, refer to the additional handset’s installation manual for
registration. If for some reason the handset is not registered to the base unit, register
the handset.
1
"
(middle soft key) i N i #
2
{^}
/{V}: “
Register H.set
” i #
3
Press and hold {INTERCOM} on the base unit
for about 3 seconds, until the registration tone
sounds.
for about 3 seconds, until the registration tone
sounds.
4
Wait until “
Enter Base PIN
” is displayed.
i
Enter the base unit PIN (default: “
0000
”).
i
#
Optional service (Caller ID)
If you subscribe to Caller ID service, you can:
– display caller information
– identify who is calling by using different display colours and
ringtones (handset phonebook category)
"/#
{
INTERCOM}
#
012345
012345
TG8280FX(e-e)_QG.fm Page 8 Wednesday, August 29, 2007 3:56 PM