Panasonic KXMB781 Bedienungsanleitung

Seite von 20
1. Introduction and Preparation
10
Detailed operating instructions are on the CD-ROM, or can be viewed at www.panasonic.com/help
Document Requirements
1.6 Setting the original
1.6.1 Using the scanner glass
1
Open the document cover (
1).
2
Place the document FACE DOWN on the scanner 
glass (
2), aligning the top left of the document with 
the corner to which the m mark points.
3
Close the document cover.
1.6.2 Using the auto document feeder
1
Insert the document (up to 20 pages) FACE UP into 
the feeder until a single beep is heard.
2
Adjust the width of the document guides (
1) to fit 
the actual size of the document.
Help Button
1.7 Help function (KX-MB781 
only)
The unit contains helpful information on the following 
topics which can be printed for reference purposes, as 
follows:
BASIC SETTINGS”
FEATURE LIST”
DIRECTORY”
FAX SND/RCV”
COPIER”
Q and A”
ERRORS”
REPORTS”
CALLER ID”
1
Press {MENU} repeatedly to display 
HELP”.
2
Press {<} or {>} repeatedly to display the desired 
item. i {SET}
3
Press {MENU} to exit.
Volume
1.8 Adjusting volume (KX-MB781 
only)
Before adjusting volume, set the operation mode to fax 
mode (page 9).
Ringer volume
While the unit is idle,
 press {V} or {^}.
L
If there are any documents in the document 
entrance, you cannot adjust the volume. Confirm that 
there are no documents in the entrance.
To turn the ringer OFF
Press {V} repeatedly to display 
RINGER OFF= OK?”
i {SET}
L
The unit will not ring.
L
To turn the ringer back ON, press {^}.
Ringer pattern
L
You can select one of 3 ringer patterns (feature 
#161).
Monitor volume
While using the monitor,
 press {V} or {^}.
1
2
1
MB271-781-PFQW2640ZA-QRG-en.book  Page 10  Tuesday, May 22, 2007  12:31 PM