Panasonic S-ICX Handbuch

Section 700 - Operation

Chapter 6. DSLT Features

S-ICX-45-700

S-ICX (International) issued June 2000

 227

•

N/A

•

Calls cannot be forwarded to an extension that already has Call Forwarding DND activated.For 
example, extension 220 can only forward to extension 225 if 225 is not forwarded.

•

If forwarding to an outside number, the destination number must be pre-programmed into a 
System Speed Dial (SSD) code.

•

Call Forwarding - Busy and Call Forwarding - No Answer can both be set at the same time.

•

You can set Call Forwarding - All Calls while Call Forwarding - No Answer and/or Call 
Forwarding - Busy are set. Cancelling one mode only affects that mode; however, the other 
modes will remain set until cancelled individually.

•

An auto camp-on to a busy extension will forward to the Call Forward No Answer destination. A 
manual camp-on to a busy extension will not forward.

•

If Call Forwarding No Answer and DND are both set, calls immediately forward to the Call 
Forward No Answer destination.

•

You can cancel both Call Forwarding and DND by entering 7 * *.

The system provides the following types of Call Hold:

•

System Hold

•

Floating Hold

•

Exclusive Hold

•

Broker’s Hold

•

Call Park (Station)

You can place either an outside or intercom call on System Hold. You can retrieve a call placed on 
System Hold from any extension that has a line appearance for the held call. 

1.   Lift the handset or press the ON/OFF key.

Intercom dial tone

2.   Enter the CF/DND All Clear code (default = 7**).

3.   Replace the handset or press the ON/OFF key.