Panasonic S-ICX Handbuch

Seite von 329
Section 700 - Operation
Chapter 3. System Features
S-ICX-45-700
S-ICX (International) issued June 2000
 31
Table 4. 
Trunk COS
Hardware Requirements
N/A
Considerations
N/A
Class of Service - Ext/Ext Restriction
Ext/Ext Restriction COS allows or restricts calls placed to other extensions based upon the Extension 
COS. Each Extension COS is programmed to either originate or not originate calls to another 
Extension COS.
Hardware Requirements
N/A
Considerations
N/A
Class of Service - Extension Feature
Extension COS allows or restricts access to certain extension features. (The extension features are 
described later in this manual.) Each extension is assigned to one of 16 classes of service (00-15). 
The following table shows the features that can be enabled/disabled for each Extension COS.
Table 5. 
Extension COS
Number
Feature
1
Intercom Ringing Tone (trunk or intercom ring tone)
2
Dial Tone to Tie Lines (Enable/Disable)
3
Forced Recover on Fast-Busy Tone (Send fast busy or disconnect line)
4
DDI Dialled Number Conversion Table (DDI/CLI Table A or B)
5
Paging on DISA/Tie-Line Call (Allow/Restrict)
6
DISA Security Code Verification
7
Network Flash Forwarding 
8
Network Flash Receive 
9
Brokers Hold for Network Calls 
10
Priority Message-Waiting Set/Cancel 
11
Network-to-Network Transfer 
12
Camp-On for Tie-Lines 
Class of Service Features
Number
Feature
1
Intercom Call Type (Tone/Voice)
2
Onhook Transfer at Ringback (Allow/Restrict)
3
Onhook Transfer at Talk (Allow/Restrict)