Panasonic S-ICX Handbuch
130
S-ICX (International) issued January 2000
S-ICX-10-700
Chapter 5. Key Telephone Features
Section 700 - Operation
Hardware Requirements
•
N/A
Considerations
•
N/A
Floating Hold
Floating Hold is a type of System Hold that allows you to retrieve a held call from any extension that
has an FF key assigned to the same Floating Hold orbit where the call is held. You can also retrieve a
call by dialling the Floating Hold orbit number for the held call.
has an FF key assigned to the same Floating Hold orbit where the call is held. You can also retrieve a
call by dialling the Floating Hold orbit number for the held call.
Floating Hold is useful when the intended recipient of a call must be located via a page. The call can
be placed in a Floating Hold “orbit” and that orbit number announced during the page. The paged
party can then pick up the call by dialling the orbit number or by pressing an FF key assigned to that
orbit number.
be placed in a Floating Hold “orbit” and that orbit number announced during the page. The paged
party can then pick up the call by dialling the orbit number or by pressing an FF key assigned to that
orbit number.
Operation
To place a call on Floating Hold:
To retrieve a call from Floating Hold:
Hardware Requirements
•
N/A
2. Enter the Specified Trunk Answer code (default = *0).
Enter TRK # displays
3. Enter the trunk number.
Action
Result
1. While on a call, press the Floating FF key (system program-
ming required) or press the HOLD key.
• Intercom dial tone
• Hold CO XXX displays (where XXX
= outside line number)
Action
Result
1. (A) Press the FF key assigned to the Floating Hold orbit
number where the call is held.
OR...
(A) Enter the Floating Hold Answer feature access code
(default = *9).
(default = *9).
CO XXX displays if line released (where
XXX = outside line number)
XXX = outside line number)
Action
Result