Panasonic S-ICX Handbuch

Seite von 354
148
S-ICX (International) issued January 2000
S-ICX-10-700
Chapter 5. Key Telephone Features
Section 700 - Operation
To remove a Busy Tone (Hang up) from an 8-party conference (Version 3.5 and 
higher):
Hardware Requirements
A Conference Card (VB-44120UK) must be installed in the System in order to conference more 
than three parties.
Considerations
**If all the internal parties hang up, the conference call will be disconnected. If the internal party 
remains in the conversation, the conference call remains in progress.
When three parties are conferenced, a built-in 3-party conference circuit is used. If no 3-party 
conference circuit is available, a conference cannot be established.
When a fourth party is added, the conference is moved to a conference circuit on the 8-party 
conference card. If an 8-party conference circuit is not available, a fourth party cannot be added 
to a conference.
Once an 8-party conference circuit is used, it continues to be used as long as the conference 
continues.
An 8-party conference card supports up to four 8-party conference circuits. 
Directory Numbers
Version 3.0 and higher
Description
A Directory Number (DN) allows extension numbers to be used on a key basis. The same DN may be 
assigned to multiple keys on the same telephone and to keys on other telephones. 
When a telephone’s extension number is assigned to a key on the same telephone, it is considered a 
Primary Directory Number (PDN). Up to three appearances of the PDN may be assigned to keys on a 
key telephone. This allows for multiple calls on the same DN. 
When a DN is assigned to an FF key on another telephone, it is considered a Non-Primary Directory 
Number (NPDN). Up to three NPDN appearances of the same DN may be assigned to keys on a 
telephone. This allows calls to the DN to appear on multiple telephones. The calls ring in on a 
specified basis - immediate, delayed, or no-ring. 
Action
Result
1.   During an conference with more than 3 parties, press 
CONF + (n) (where is the number 1-7 for the conference 
parties) to individually select a conference party.
The other party is placed on hold. 
2.   If you did not select the conference party that is giving busy 
tone, re-enter the conference by pressing the CONF key.
CONF Members: X (where X = 4-7 
party conference) displays
3.   If you selected the conference party that is giving busy tone, 
hang up and then go off-hook again and press the CONF 
key to re-enter the conference call.
CONF Members: Y (where Y = 4-6 
party conference) displays