Panasonic S-ICX Handbuch
Section 700 - Operation
Chapter 5. Key Telephone Features
S-ICX-10-700
S-ICX (International) issued January 2000
187
To manually link speed dial keys together:
Hardware Requirements
•
N/A
Considerations
•
N/A
Speed Dial Name Assignments
You can assign names to PSD numbers from a key telephone without entering the programming
mode. If allowed in the Extension Class of Service (COS), you can also assign names to SSD
numbers.
mode. If allowed in the Extension Class of Service (COS), you can also assign names to SSD
numbers.
(PSD names can contain a maximum of 7 characters. SSD names can contain a maximum of 16
characters.)
characters.)
Operation
PSD Names:
To set PSD names using a large-display or small-display phone:
Action
Result
1. Lift the handset or press the ON/OFF key.
Intercom dial tone
2. If necessary, access an outside line.
3. If you are using a PSD number, press the one-touch key for
the first part of the number.
If you are using an SSD number, press the MEMORY key,
then enter the SSD bin number.
then enter the SSD bin number.
4. Use the one-touch keys or press the MEMORY key and
enter the SSD codes to dial the parts of the phone number
until it is completed.
until it is completed.
Action
Result
1. Lift the handset or press the ON/OFF key.
2. Press the PROG key.
3. Press the * key.
4. Enter 0 for the PSD Name Assignment mode.
A B C D E F P80 displays (where P80 =
PSD bin 80)
PSD bin 80)
5. Press the up or down arrow key to display the desired PSD
bin number.
A B C D E F PXX displays (where PXX
= desired PSD bin number)
= desired PSD bin number)