Panasonic S-ICX Handbuch
54
S-ICX (International) issued January 2000
S-ICX-10-700
Chapter 3. System Features
Section 700 - Operation
Network Flash Transfer
Version 3.5 and later
When three or more systems are networked together with one S-ICX as the tandem, Network Flash
Transfer determines where a call is held when Network Hold is pressed.
Transfer determines where a call is held when Network Hold is pressed.
Related Programming
•
FF1-0-04: Trunk COS (Network Flash Forwarding)
Network Hold
Version 3.5 and later
Network Hold allows the user to place a call on hold by pressing a programmed line key or MCO key.
When using Network Hold, you cannot establish a conference call between nodes, and only one party
can place the call on hold.
When using Network Hold, you cannot establish a conference call between nodes, and only one party
can place the call on hold.
Related Programming
•
FF1-0-04: Trunk COS (Broker’s Hold for Network Calls)
•
FF1-1-01-0020: Network Flash Signal Timer
•
FF1-2-02: FF Dial Codes: Plan A (Network Flash Send During Intercom Dial Tone)
•
FF1-2-03: FF Dial Codes: Plan B (Network Flash Send During Intercom Dial Tone)
•
FF4-0-BSSC-0: FF-Key Assignment (Network Flash During Talk on FF-key)
Network Paging
Network Paging allows users on one System to page on another System when the appropriate Class of
Service (COS) allows.
Service (COS) allows.
Network Transfer Recall
Version 3.5 and later
Network Transfer Recall allows a call which has been transferred to another node to recall back to the
transferring extension.
transferring extension.
Tandem Connection
Tandem Connection allows calls that are received over the network tie lines to be automatically routed
on to another PBX or out to the public network.
on to another PBX or out to the public network.
Hardware Requirements
•
T1 (USA), E&M (HK) or AC-15 (UK) Card
Considerations
•
N/A