Panasonic KXTG6461E Bedienungsanleitung

Seite von 48
Answering System
29
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Answering system
The answering system can answer and record 
calls for you when you are unavailable to answer 
the phone.
You can also set the unit to play a greeting 
message but not to record caller messages by 
selecting “Greeting Only” as the recording 
time setting (page 33).
Important:
L
Only 1 person can access the answering system 
(listen to messages, record a greeting message, 
etc.) at a time.
L
When callers leave messages, the unit records 
the day and time of each message. Make sure 
the date and time have been set correctly (page 
13).
Memory capacity
The total recording capacity (including your 
greeting message) is about 20 minutes. A 
maximum of 64 messages can be recorded.
Note:
L
If message memory becomes full:
– “Messages Full” is shown on the base unit 
and handset display.
– The answer on indicator on the base unit 
flashes rapidly when the answering system is 
turned on.
L
When the message memory becomes full:
– If you use the pre-recorded greeting 
message, the unit automatically switches to 
another pre-recorded greeting message 
asking callers to call again later.
– If you recorded your own greeting message, 
the same message is still announced to 
callers even though their messages are not 
recorded.
Turning the answering 
system on/off
The answering system is preset to on.
Press {s} to turn on/off the answering system.
1
8
 (middle soft key)
2
{V}
/{^}: “Answer System” i M
3
{V}
/{^}: Select “Answer On” or “Answer 
Off”. i M i {ih}
Note for base unit and handset:
L
When the answering system is turned on, the 
answer on indicator on the base unit lights up 
and D is displayed next to the battery icon on 
the handset.
Call screening
While a caller is leaving a message, you can listen 
to the call through the base unit’s or handset’s 
speaker. To adjust the speaker volume, press {^} 
or {V} repeatedly.
You can answer the call by lifting the corded 
handset from the base unit or pressing {C} on 
the handset. Call screening can be set for each 
handset and/or base unit.
Note:
L
To turn this feature off, see page 33.
Greeting message
When the unit answers a call, a greeting message 
is played to callers.
You can use either:
– your own greeting message
– a pre-recorded greeting message
Recording your greeting message
1
8
 (middle soft key)
2
{V}
/{^}: “Answer System” i M
3
{V}
/{^}: “Greeting” i M
4
{V}
/{^}: “Start REC” i M
5
{V}
/{^}: “Yes” i M
6
After a beep sounds, hold the handset about 
20 cm away and speak clearly into the 
microphone (2 minutes 30 seconds max.).
7
Press O to stop recording.
=
 Base unit
Y
 Handset
=
 Base unit / Y Handset
Y
 Handset
TG6461E(e).book  Page 29  Monday, March 16, 2009  8:50 AM