Panasonic nv-hs960am Bedienungsanleitung
22
6
Press the OK button T again to conclude the
settings.
≥
settings.
≥
To programme additional
timer recordings, repeat
operation steps 1–6.
timer recordings, repeat
operation steps 1–6.
7
Press the TIMER REC button D to switch the VCR
over to the timer recording standby mode.
≥
over to the timer recording standby mode.
≥
Check that “Á” is lit on the VCR display.
If it is flashing, check the timer recording details
again. (See page 23.)
If it is flashing, check the timer recording details
again. (See page 23.)
To Programme with the G-code
Function
Function
The G-code numbers assigned to each TV programme and
published alongside the TV programme listings in
newspapers and magazines make it extremely easy to set the
VCR for timer recording.
The duration of a timer recording programmed with G-code
number may be slightly longer than the actual duration of the
TV programme.
published alongside the TV programme listings in
newspapers and magazines make it extremely easy to set the
VCR for timer recording.
The duration of a timer recording programmed with G-code
number may be slightly longer than the actual duration of the
TV programme.
Preparations
≥
≥
Confirm that the VCR is on.
≥
Confirm that the TV is on and the VCR viewing channel is
selected.
selected.
≥
Insert a video cassette with an intact erasure prevention
tab.
As soon as the cassette is inserted, the Cassette Number
Check starts. Wait a few moments until it is completed.
(See page 14.)
tab.
As soon as the cassette is inserted, the Cassette Number
Check starts. Wait a few moments until it is completed.
(See page 14.)
≥
Set the VCR/TV switch P to “VCR”.
Example:
Programming a timer recording of a TV programme with the
G-code number 920126
Programming a timer recording of a TV programme with the
G-code number 920126
Operations
1
Press the G-CODE button L to display the menu
for entering the G-code number on the TV.
for entering the G-code number on the TV.
2
Press the Numeric buttons 2 to enter the G-code
number.
≥
number.
≥
If you have entered a
wrong digit, press the
Cursor button (2) R and
then enter the correct digit.
wrong digit, press the
Cursor button (2) R and
then enter the correct digit.
3
Press the OK button T to display the programmed
content.
content.
4
Press the SP/LP button E to set the desired tape
speed.
≥
speed.
≥
SP provides standard
recording time and optimum
picture quality.
LP provides double
recording time with slightly reduced picture quality.
EP provides triple recording time with slightly
reduced picture quality.
Regarding the “A” indication, refer to page 23.
recording time and optimum
picture quality.
LP provides double
recording time with slightly reduced picture quality.
EP provides triple recording time with slightly
reduced picture quality.
Regarding the “A” indication, refer to page 23.
≥
To extend the ending time or to make any
corrections, use the Cursor buttons (3421) R,
the Channel buttons :, the DATE button ;, the ON
button G, the OFF button F, the SP/LP button E.
corrections, use the Cursor buttons (3421) R,
the Channel buttons :, the DATE button ;, the ON
button G, the OFF button F, the SP/LP button E.
5
Press the TAPE button C to select the
corresponding cassette tape length.
≥
corresponding cassette tape length.
≥
The tape length is displayed on the VCR display.
On Screen Display
Timer recording
Pos
Start Stop SP VPS
Name DATE
ON OFF LP
Min
ZDF
27/10 We 20:00 21:30 SP
ON
90
jjjjj
jj
/jj jj jj
:
jj
jj
:
jj
jj
jjj
jjj
jjjjj
jj
/jj jj jj
:
jj
jj
:
jj
jj
jjj
jjj
jjjjj
jj
/jj jj jj
:
jj
jj
:
jj
jj
jjj
jjj
jjjjj
jj
/jj jj jj
:
jj
jj
:
jj
jj
jjj
jjj
jjjjj
jj jj jj jj jj
jj jj
jj
jjj
jjj
jjjjj
jj jj jj jj jj
jj jj
jj
jjj
jjj
jjjjj
jj jj jj jj jj
jj jj
jj
jjj
jjj
ZDF
27/10 We 20:00 21:30 SP
ON
90
jjjjj
jj
/jj jj jj
:
jj jj
:
jj
jj
jjj
jjjjj
jj
/jj jj jj
:
jj jj
:
jj
jj
jjj
jjj
jjjjj
jj
/jj jj jj
:
jj jj
:
jj
jj
jjj
jjj
jjjjj
jj jj jj
jj jj jj jj
jj
jjj
jjj
jjjjj
jj jj jj
jj jj jj jj
jj
jjj
jjj
jjjjj
jj jj jj
jj jj jj jj
jj
jjj
jjj
jjjjj
jj jj jj
jj jj jj jj
jj
jjj
jjj
Timer recording
Pos
Start Stop SP
VPS
Name DATE
ON OFF LP
PDC
Min
G-code
9 2 0 1 2 6
When “– –” Appears under “Pos/
Name” after Entering a G-code Number
Name” after Entering a G-code Number
Pos/Name stands for Programme Position/TV Station
Name.
Normally, the name of the TV station or the number of
the programme position is displayed under “Pos/Name”.
In such a case, follow the operation steps below to
correct it.
Name.
Normally, the name of the TV station or the number of
the programme position is displayed under “Pos/Name”.
In such a case, follow the operation steps below to
correct it.
Press the Channel buttons :
repeatedly to select the
programme position on which
the TV programme to be
recorded will be broadcast.
repeatedly to select the
programme position on which
the TV programme to be
recorded will be broadcast.
After you have entered the information of a TV station,
it remains stored in the VCR’s memory, and you do not
need to enter it again in the future.
it remains stored in the VCR’s memory, and you do not
need to enter it again in the future.
Timer recording
Pos
Start Stop SP
Name DATE
ON
OFF LP
Min
jj jjjjj
15:00 17:00 SP
120
jjjjj
jj
/jj jj jj
:
jj
jj
:
jj
jj
jjj
jjjjj
jj
/jj jj jj
:
jj
jj
:
jj
jj
jjj
jjjjj
jj
/jj jj jj
:
jj
jj
:
jj
jj
jjj
jjjjj
jj
/jj jj jj
:
jj
jj
:
jj
jj
jjj
jjjjj
jj
/jj jj jj
:
jj
jj
:
jj
jj
jjj
jjjjj
jj jj jj jj jj
jj jj
jj
jjj
jjj
jjjjj
jj jj jj jj jj
jj jj
jj
jjj
jjj
“– –” indication
To Suspend the Timer Recording Standby
Mode
Mode
See the previous page.
Note:
≥
≥
If the VCR is not put in the timer recording standby mode at
the latest 10 minutes before the programmed timer
recording starting time, the “Á” indication flashes on the
VCR display. In this case, press the TIMER REC button D
to put the VCR in the timer recording standby mode.
the latest 10 minutes before the programmed timer
recording starting time, the “Á” indication flashes on the
VCR display. In this case, press the TIMER REC button D
to put the VCR in the timer recording standby mode.