Panasonic ICX Handbuch

54

ICX (International), issued March/1998

ICX-35-700

Chapter 3. System Features

Section 700 - Operation

•

FF6-2-05: Digit Modify Table - Add Ending Digits

•

FF6-2-05-0005: Numbering Plan

•

FF6-2-06: Authorization Code (UK Only)

•

FF6-2-09-0001: Dialing Access Voice Mail System

•

FF1-0-04: Trunk COS (Priority Message - Waiting Send/Cancel)

•

FF8-1-05: Call-Forward ID Codes for Voice Mail

•

FF8-1-06: MSG Key ID Codes (USA only)

Network Extension Calling allows you to reach an extension on another PBX. Based on the number 
you dial, the System network routes the call automatically.

CPC-96, CPC-288, and CPC-576 Version 3.5

When three or more systems are networked together with one DBS 576 as the tandem, Network Flash 
Transfer determines where a call is held when Network Hold is pressed.

•

FF1-0-04: Trunk COS (Network Flash Forwarding)

CPC-96, CPC-288, and CPC-576 Version 3.5

Network Hold allows the user to place a call on hold by pressing a programmed line key or MCO key. 
When using Network Hold, you cannot establish a conference call between nodes, and only one party 
can place the call on hold.

•

FF1-0-04: Trunk COS (Broker’s Hold for Network Calls)

•

FF1-1-01-0020: Network Flash Signal Timer

•

FF1-2-02: FF Dial Codes: Plan A (Network Flash Send During Intercom Dial Tone)

•

FF1-2-03: FF Dial Codes: Plan B (Network Flash Send During Intercom Dial Tone)

•

FF4-0-BSSC-0: FF-Key Assignment (Network Flash During Talk on FF-key)

Network Paging allows users on one System to page on another System when the appropriate Class of 
Service (COS) allows. 

CPC-96, CPC-288, and CPC-576 Version 3.5

Network Transfer Recall allows a call which has been transferred to another node to recall back to the 
transferring extension.

Tandem Connection allows calls that are received over the network tie lines to be automatically routed 
on to another PBX or out to the public network.